The pace of urbanization in China has increased significantly in recent years, with more and more young people entering cities and living in buildings. The standard of living has been significantly improved, and the toilet has become one of the must-have facilities in every bathroom. But do you understand the flush button on the toilet? Why is it designed to have two buttons? What do these two buttons do? Let's take a look at it with xiaobian.
Most people choose to install toilets when renovating new homes, and few people choose squat toilets. Whenever we flush after the toilet, we will find that there are two flushing buttons above the toilet, no matter which toilet can be flushed normally, it seems that there is no difference on the surface, but in fact, these two buttons have a great difference, if you understand the difference between them, you can save a lot of unnecessary waste when flushing.
To know the difference between the two buttons of the toilet, we first need to understand how the toilet works. The water used in the toilet is all stored in the water tank on the back side of the toilet, when you press the button after the flushing valve opens, the water in the tank flushes into the toilet, the momentum of the water starts the siphon, and the dirt in the urinal is sucked into the drain. At the same time, the water level in the water tank drops, the float drops, the water flows through the upper water valve to fill the water tank, when the float reaches a certain height, the upper water valve closes, and the water tank completes the water injection.
The larger button above the tank is called the full water button, and the smaller button is called the half water button. These two buttons control the amount of water discharged, and when pressed, the half-water button drains one-third of the water in the tank, making it suitable for urinating. As the name suggests, the water in the tank will be completely drained when pressed for use during bowel movements. We must pay attention to this detail when using the toilet, the correct use of these two buttons, not only can save water resources, but also greatly extend the service life of the toilet. When we use the toilet, we will definitely encounter the situation of toilet blockage, which is very normal, at this time we can do it ourselves, press two buttons at the same time, and the water in the tank flows out at the same time, forming a large water pressure, which may flush out the toilet blockage at once, so that the toilet is unobstructed, thus solving the problem.