After the holiday, it is a time of high accident incidence
Some production equipment is restarted after it is discontinued
Or change the pace of production
Prone to mechanical failure
Some employees are lax in their thinking after the holiday
Awareness of safe production is weakened
Accidents are easy to have
Work resumed after the holiday
How to do a good job in safe production
It's especially critical and important
Eight common dangers after the holiday
01
Left center brackets
Illegal operation
Start, shut down, move the machine without permission, start and shut down the machine without giving a signal, the switch is not locked, causing accidental movement, power or leakage, etc., forget to turn off the equipment, ignore the warning mark, warning signal, operation error (refers to the operation of buttons, valves, wrenches, handles, etc.), running operations, etc.
02
The safety device fails
The safety device was removed, the safety device was blocked, the action failed, and the adjustment error caused the safety device to fail.
03
Use unsafe equipment
Temporary use of facilities that are not secure, and use of equipment without safety devices.
04
Hand instead of tool operation
Replace hand tools with your hands, remove chips by hand, fix without fixtures, take the workpiece by hand for machining, and improperly store objects (refers to finished products, semi-finished products, materials, tools, chips and production supplies, etc.).
05
Venture into dangerous places
Entering the oil irrigation or well without the permission of the safety inspectors, not "knocking on the top" to start the operation, risking the signal, speeding up and getting on and off the car, flammable and explosive occasions with open flames, taking a minecart without permission, walking in the wringing lane, and not watching in time.
06
Climbing and sitting in an unsafe position
There is a distraction behavior in working under the lifting object, staying, refueling, repairing, adjusting, welding, cleaning, etc. when the machine is running.
07
Do not wear labor protection products
Paralyzed, blindly confident, should wear labor protection supplies to work in order to operate, without wearing labor protection supplies to carry out operations.
08
Unsafe attire
Wear gloves when working next to equipment with rotating parts through fat clothing and maneuvering equipment with rotating parts.
Say goodbye to the relaxed atmosphere of vacation
Get into the seriousness of your work
Put away this guide
Safely turn the work on
One case
Formulate a work plan for resuming work and production and safe production, clarify work responsibilities and specific tasks, and ensure the orderly resumption of work and production.
Two signs
1. Employees should sign a report to confirm the personnel's position;
2. Sign a letter of responsibility for safe production to further clarify the responsibility for safe production.
Three tries
1. Trial scheduling, scheduling is the core of production and operation, and orderly and stable scheduling is the key to safe production;
2. Test equipment, large equipment to test operation, common tools and equipment to be no load trial;
3. Try protection, protective equipment, support equipment, etc. should be tried to test the efficiency.
Four receipts
Four post-festival closing methods
1. Hold safety meetings, unify thinking, and put forward safety work requirements;
2. Do safety training, on-the-job safety knowledge and skills to do training;
3. Make safety commitments and organize employees to carry out safety commitment activities;
4. Do safety warnings, and carry out warning education through accident cases.
Five checks
1. Check the state of mind, grasp the thoughts and emotions of employees, and orderly relieve and adjust;
2. Check the training and submission, and focus on the safety training and technical submission before taking up the post;
3. Check safety measures, check the implementation of various safety measures and rectification;
4. Check the safety records, check the records and archives of each department and each post to perform safety work, and control the implementation of procedures;
5. Check the violations, and check and correct all kinds of "three violations" at the work site.
Six levels
Focus on six high-risk points for resuming work and production
1. Pay attention to post-holiday syndrome to prevent accidents caused by inattention, slipping, emotional instability, etc.;
2. Pay attention to new employees, be sure to do a good job in safety training and technical communication, and focus on inspection;
3. Pay attention to the adjustment of positions, and pay attention to and inspect some post change personnel or changed positions;
4. Pay attention to the equipment activation link, when the equipment is deactivated and enabled again, it is necessary to do a good job of inspection, perform the procedures, and do a good job of protection;
5. Pay attention to maintenance operations, maintenance has always been high-risk, accident-prone operations, should be highly concerned;
6. Pay attention to the working environment, and confirm the safety of the working environment.
Sevenfold
Seven key areas of post-holiday safety checks
1. Focus on inspecting the distribution room;
2. Focus on inspecting the fire control room;
3. Focus on checking the limited space;
4. Focus on inspecting storage places;
5. Focus on the inspection of hazardous chemicals;
6. Focus on inspecting dangerous work sites;
7. Focus on inspecting the places where special equipment is used.
Eight strokes
Eight tricks to troubleshoot hidden dangers
1. Broken: a piece of equipment, a component, as long as it is damaged, can basically be identified as a hidden danger. For example, the connection hose is broken, the equipment is rusted, etc.
2. Lack: What should be there and not, can be identified as a hidden danger.
3. Naked: Judging by the common sense of ordinary people, a thing is dangerous, but naked is within the reach of people and can be identified as a hidden danger.
4. Chaos: The essence of safe production is a kind of order management. If it is disordered and chaotic, it must be a hidden danger.
5. Squeeze: Safety production generally has safety distance requirements, once there is zero distance or too small distance crowding, it can generally be identified as a hidden danger.
6. Blockage: It should be unblocked but not unblocked, which can be identified as a hidden danger.
7. Flash: If you find a device running indicator or the monitor flashing continuously, it can generally be judged as a hidden danger.
8. Shaking: Under normal circumstances, whether it is mechanical equipment, work platforms or work aids, good stability and firmness are required. Once the opposite is found, it can be identified as a hidden danger.