Follow the latest
Measures for the Administration of Scoring of Road Traffic Safety Violations,
"Driving a motor vehicle on highways, on urban expressways
Reversing, retrograde, crossing the central divider",
12 points at a time!
Here's the question:
Mistakenly into the ETC lane, or
When walking the ETC channel, you don't lift the bar
Can I reverse? Will I be deducted 12 points?
If I stray into the ETC lane/ETC without lifting the pole, can I reverse?
The first thing to understand is that on the highway, the toll booth U-turn (equivalent to retrograde) is absolutely not allowed, as long as it is photographed by the monitoring, it will definitely face penalties.
However, if you reverse at the toll gate, if it is because you take the wrong channel, such as non-ETC vehicles entering the ETC channel, or the channel is closed, you can slowly reverse and change the manual channel. However, when reversing, the posture should be correct, otherwise once there is a collision accident, you need to bear full responsibility!
ETC can't lift the lever/mistakenly enter etc, what should I do correctly?
If you have not fully entered the ETC, you can choose to go soft isolation. Usually, when fast into the ETC lane, most toll booths will set up a soft separation, these separations can be removed, remove these separations to change lanes, take the manual toll lane on the line.
If you have already entered etching, it depends on the situation:
1
When there is no car in the rear, you can reverse the car and change lanes
When you stray into the ETC lane or encounter the ETC can not lift the pole, you can solve it by reversing and taking the manual passage.
At this time, we must observe the surrounding situation, such as there is no car in the rear, you can slowly reverse out of the lane isolation area, and then change to the manual passage, in this case, reversing is not a violation, will not be deducted points fine.
2
There are not many vehicles in the rear, which can be communicated and given way
If there are not many vehicles in the rear, do not sit on the car and wait for other vehicles to give way.
At this time, be sure to take the initiative to communicate with the rear owner under the condition of ensuring safety, ask other car owners to give way, and then slowly reverse out. If others do not agree to give way, choose the third option below.
3
There are too many vehicles in the rear, look for high-speed staff
If the waiting line in the rear is too long, do not panic, and get out of the car to seek help from the high-speed staff while ensuring safety.
High-speed staff will guide you according to the situation on site, or assist you with toll transaction operations and manually lift the pole, and then you can drive away from the toll booth.
All in all, ETC do not raise the pole do not panic, no matter what the reason for not lifting the pole, should obey the guidance of the toll station site staff, must not turn around or reverse without authorization, so as not to form a violation, or even cause a traffic accident.
ECT does not lift the bar, how many reasons?
The reason why the ECT does not lift the lever, according to the official explanation, is usually related to the speed of the car is too fast, etc. THE ETC itself fails, the OBU (electronic tag) does not match the vehicle, and the OBU itself fails.
If you understand and solve these problems in advance, you can pass etc in seconds!
The speed of driving into the ETC lane is too fast
Under normal circumstances, the speed is controlled within 20km/h, otherwise it is easy to read etc information, resulting in abnormal prompts and no lifting of the bar.
Workaround: Take it back a little bit and rescan.
There is a problem with the ETC device
ETC electronic tag failure, looseness, shedding, improper position of the paste and other reasons, may also cause the inability to read the equipment information.
Solution: If no OBU is displayed, take the card out and reinsert it; if it still can't pass, first take the manual channel, and then go to the ETC outlet to process.
Blacklisted status
Lane failures, pass card failures, blacklists, etc., can also lead to unlifted poles or illegal information prompts.
The blacklist status includes: insufficient bank card balance or insufficient credit limit to cause deduction failure, application for ETC card report loss, card suspension, cancellation and other functions, suspected of evading tolls, etc.
Solution: Find the ETC outlet to deal with it and unblock the status list.
In fact, walking ETC is not so complicated, but sometimes we are easy to draw snakes and add to our own troubles. Whether it is a holiday or a normal highway, do not move etc. If there is an over-deduction, remember to call 95022.