I don't know if you have any plans to upgrade the old computer, I think the current M.2 SSD performance is quite good, especially some domestic brands of M.2 SSD, the cost performance is very high. So, if you think that your computer's daily boot speed is not fast enough, and you don't want to change the computer, obviously upgrading the computer is a good choice. If you want to increase speed, the most direct and cost-effective way to upgrade is to replace the hard disk. If your motherboard reserves the M.2 interface, then, congratulations, you can use the M.2 SSD as a system disk, improve the boot speed, running speed, and let your old computer play out its youthful vitality again. Of course, if the motherboard does not support M.2, there is no problem, and buying a riser card can improve the reading and writing speed of daily files, which is also a good choice.
aigo's P2000 M.2 SSD, presumably a lot of small partners have been in use recently. 2100Mb/s speed, 5 years warranty, the recent period of time is very cost-effective, to the old computer to expand the storage space is a good choice.
Standard size, appearance of the national trend
Out of the box we skipped, directly look at this aigo P2000 M.2 solid state version, the size of this product is 2280, the sticker is very distinctive, orange and red and white matching, there is a more popular national style color, the color is still very happy.
The front of the sticker is marked with the logo of aigo and the name of the product, NVMe SSD P2000. In addition, this product uses a single-sided M.2 design, the advantage is that whether you are a desktop or a notebook with a cramped internal space or an ultra-thin book, the mini host can be used, and the scope of application is still very wide.
On the back is a flat PCB board
Tear off the sticker, you can see that aigo M.2 solid state with two 512G particles composed of 1G storage, particles select high-quality 3D TLC particles, with a higher TBW, my 1T version of the warranty write volume is 512TB, fully able to meet the daily storage needs, and the 5-year warranty is also very good.
Using the new PCIe3.0 four-channel interface, NVMe 1.3 technical standard, Hui Rong main control, with high-quality TLC particles, convenient performance, sequential reading speed reached 2100MB/s, write up to 1600MB/s, while this product also supports HMB intelligent algorithm, can greatly improve the computing power of computer storage, bringing a stable and fast experience of use, which has a very obvious feeling in the speed test in the back.
The speed is measured and the effect is satisfactory
So, how does this aigo P2000 M.2 SSD actually perform? Can't wait to test it, the basic configuration of the test desktop is 490 motherboard + 10700K + 16G memory, the test results are for reference only.
Note that the new hard disk on the computer, you need to initialize the hard disk operation in computer management, the whole process is relatively simple, according to the prompts to operate, no need to repeat.
In the ATTO test, the sequential read was 2054.691MB/s and the sequential write was 1669.374MB/s.
In the TxBENCH test, the sequential read is 2083.351MB/s and the sequential write is 1670.003MB/s.
As can be seen from the above two test software, the speed of the aigo P2000 NVMe SSD is basically close to the theoretical value given by the official, and the performance of 4K is also very good.
In addition, through the benchmark test of the data progress of this SSD to write 50G and 100G, it is found that the read and write speeds are very stable, and the curve is almost not too large.
Document data for 5G
10G of document data
In fact, by copying a 10G document and a 5G document into the aigo P2000 NVMe SSD, the 10G stable file write speed was stable and maintained above 1GB/s, while the highest peak of 5G file write reached 3GB/s, with an average write speed of 2.5GB/s. Judging from the running score and measured values, the performance of the aigo P2000 NVMe SSD exceeded my expectations.
Next, I can install it on my old computer, however, my old computer does not have an M.2 interface, the system disk is SATA solid state, and bought a riser card, and then installed this aigo P2000 solid state, the measured storage speed has been significantly improved, and there is no need to wait for the storage data later.
The above is to start aigo NVMe SSD P2000 some small experience, personal feelings want to improve the boot speed of the old computer, running speed, expand storage space, this product is still worth starting, do you think?