What is the CE certification testing standard for photocopiers? A photocopier is an electrical appliance that uses electrostatic technology for document reproduction. The speed of copying by the copier is fast, the operation is simple, and the main difference with the traditional lead printing, wax paper mimeographing, offset printing, etc. is that it is possible to obtain copies directly from the original without going through other intermediate means such as plate making.
The accurate meaning of CE certification is: CE marking is a safety conformity mark rather than a quality qualification mark.
It is regarded as a passport opened by manufacturers and entered the European market, and all products bearing the "CE" mark can be sold in the eu member states without meeting the requirements of each member state, thus realizing the free circulation of goods within the EU member states.
EP/EN 61000 standard for copiers:
IEC/EN 61000-3-2 and IEC/EN 61000-3-3 are two standards for harmonic current emission and voltage fluctuations and flicker, respectively, and are widely used in CE-EMC's self-declaration.
IEC/EN 61000-3-2 is suitable for products with a current of less than or equal to 16A per phase and connected to a low-voltage power supply network, specifically for products with supply voltages of: 220/380V, 230/400V, 240/415V that need to meet the harmonic current limit requirements.
IEC/EN 61000-3-2 is suitable for products with a current of less than or equal to 16A per phase and connected to a low-voltage power supply network with a voltage of 220V-250V/50 Hz, and is not connected to a Traditional connection.
above
![The 2021 "Most Optimistic Domestic Printer Copier" list is on the list[fig]](data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACwAAAAAAQABAAACAkQBADs=)