In the new situation
The demand for middle and senior talents in the manufacturing industry is becoming more and more urgent!
It is understood that the Ministry of Human Resources and Social Security recently released
In the third quarter of 2021, the country's "most under-needed" 100 occupations were ranked
58 belong to "manufacturing and related personnel"
As an important part of the manufacturing industry, the rubber and plastic industry also generally has the problem of lack of talents. The demand for rubber and plastic senior technicians in enterprises is gradually strong, and "one job is difficult to find" has prompted the salary of technicians to "rise in the water". Among them, Plastic plastic believes that the rapid growth of high-end rubber and plastic demand and the inflow of highly educated and high-quality talents are important reasons for the emergence of a talent seller market.
Middle and senior technicians in the rubber and plastic industry ushered in spring
Double carbon target + 5G development of high-end plastic demand growth
Under the development of double carbon targets and 5G-related related technologies, the demand for high-end plastics in the four downstream areas has grown rapidly, spawning more talent markets for rubber and plastic middle and senior technicians.
Automotive industry
The demand for high-end chemical materials is growing
The automobile industry is a typical representative of the manufacturing industry, a car is composed of more than 10,000 parts, involving more than 4,000 materials, of which plastics play a role that cannot be ignored.
Automobile is one of the key downstream demand areas for high-end chemical materials, and the total use of high-end chemical materials in China's automotive field in 2019 is about 3.5 million tons, and the market volume is about 58.3 billion yuan. Among them, 1.49 million tons of high-end polyolefins and 610,000 tons of engineering plastics.
The proportion of automobile lightweight is getting higher and higher, represented by plastics and composite materials, at present, German bicycle plastics and composite materials account for 22.5% of the entire car, while China is only 9%, it is expected that in 2025, plastics and composites will reach about 12% of the vehicle weight.
New energy vehicles such as electric vehicles and fuel cell vehicles are developing rapidly, and their energy comes from energy storage batteries or fuel cells. It is estimated that by 2025, the demand for high-end chemical materials for automobiles in China will reach 5.16 million tons, of which the amount of high-end polyolefins will reach about 2 million tons, and the amount of engineering plastics will exceed 1 million tons.
Electronic and electrical field
There is a large demand for high-end chemical material substitution
The demand for high-end materials in the field of electronic and electrical appliances mainly includes "table" and "inside" two aspects, "table" refers to high-end chemical materials interior and exterior decoration and structural parts, mainly used in household appliances and other fields; "inside" refers to the application of high-end chemical materials in electronic signal processing, conversion, transmission and other module components, including printed circuit boards, integrated circuits, antenna oscillators, etc.
In 2018, China's electronic and electrical appliances consumed a total of 5.61 million tons of high-end chemical materials, of which the demand for plastics was about 2.5 million tons, mainly engineering plastics, high-performance PP, etc., with an output value of more than 50 billion yuan.
In the future, electronic and electrical products will be lighter and smarter, and the application and popularization of 5G will accelerate this change. The construction of 5G base stations has brought about the demand for PCB substrate PTFE materials. Display materials are developing rapidly, and the PVA market demand is strong. The rapid growth of flexible circuit board materials has driven the demand for materials such as polyimide films and liquid crystal compounds. As the world's largest laptop production base and the second largest mobile phone production base in China, Chongqing's electronic information manufacturing industry has developed rapidly, and it has contributed greatly to the growth of demand for related plastics.
Overall, the development of electronic and electrical appliances is inseparable from the support of high-end chemical materials, it is expected that by 2025, the total demand for high-end plastics in this field will reach 4.16 million tons, with an annual compound growth rate of 7%, and the output value will exceed 78 billion yuan.
Construction pipe field
Demand for high-end plastics is growing steadily
The demand for high-end chemical materials in the field of building pipes mainly includes building reinforcement, new building materials and high-end pipes. At present, China's plastic water supply pipes are basically self-sufficient, but the gas transmission high-pressure pipes are still mainly imported.
In 2018, a total of 5.55 million tons of high-end chemical materials were consumed in the field of construction pipes in China, of which the demand for high-end polyolefins, engineering plastics and other plastic products was 3.21 million tons, and the market size was about 42 billion yuan, mainly high-end polyolefin pipes.
It is estimated that by 2025, the total demand for high-end plastics in China's construction pipes will reach 4.5 million tons, with an annual compound growth rate of 5.1%, and the overall demand growth rate will be relatively stable.
The future growth rate of hexene and octene copolymer multi-peak polyethylene pipe is considerable. In the past decade, China's demand is about 3 million tons, accounting for 28% of the world's total consumption, most of which are used in the field of plastic pipes, of which the amount of water pipe materials and gas pipe materials is about 2.2 million tons and 500,000 tons, respectively.
The high-end construction market is driving demand for polybutene-1 pipes. Plastic pipes are the main application area of polybutene-1, accounting for more than 50% of the total consumption of PB-1.
In the field of daily packaging
Demand for high-end plastics is growing rapidly
The field of daily packaging is one of the largest areas of demand for high-end materials in China. In 2018, the demand for high-end materials in China's daily packaging field was about 1.75 million tons, and the market size reached 23.3 billion yuan, covering high-end polyolefins, engineering plastics and biodegradable materials.
The proportion of metallocene polyethylene applications has increased significantly, and domestic barrier packaging materials have also shown great potential, especially degradable plastics have ushered in the outlet. With the improvement of processing performance and modification technology, more advantageous materials such as PBAT, PBST, PGA will usher in greater development during the "14th Five-Year Plan" period.
The demand for high-end plastics in the fields of automobiles, electronic appliances, building pipes, and daily packaging has gradually emerged, prompting the transformation and upgrading of many rubber and plastic enterprises, and the continuous development of automation, mechanization and sustainability. In addition to the demand for talents, enterprises put forward higher quality and technical requirements for related technical personnel.
High-quality, highly educated talents began to favor the manufacturing industry
In recent years, factories seem to have been abandoned by young people. On average, more than 1.5 million people leave manufacturing each year, and many of them become delivery workers, couriers, e-commerce or anchors on the other end of the phone. But now the trend has changed again: graduate students and doctoral students have begun to favor factories, and programmers have left large factories and entered factories.
On December 3, Sichuan Times, a wholly-owned subsidiary of new energy giant Ningde Times, launched recruitment in Yibin, attracting a large number of job seekers, and the scene was crowded with people, and the liveliness was comparable to the Spring Festival.
The rise of emerging industries and the development of high-tech manufacturing are also attracting more and more highly educated talents to join.
According to data from the National Bureau of Statistics, the profits of industrial enterprises above designated size in the country increased by 42.2% year-on-year from January to October this year. Among them, the added value of high-tech manufacturing above designated size in China increased by 14.7% year-on-year in October. And these young people also see the future of China's manufacturing industry.
Professor Su Zhongxing of Chinese Min University: China's manufacturing industry is very promising, and the next 5-10 years of manufacturing will usher in a golden period and usher in the best era.