Follow | Top
The fresh play content you bring every day will never make you regret it
Model Maker |@_Chilopoda
tag | 3D printing, line engraving, painting, masterpiece appreciation
This work is an original body made by Chilopoda full 3D printing, he named it HY GOGG ANURA, using the name of the high war crab, bringing amphibious features, the head, palms, legs, etc. have the bionic features of frogs, so it seems more appropriate to call it a high war frog.
Chilopoda also took this work in the 24th edition of "I Za", unfortunately did not pass a review, but still does not prevent it from being a good original machine.
Let's take a look at how this body is made from head to toe.
The first is the outer nail of the thorax, which is very similar to the aquatic MS of the Gundam series.
The head is also a reference to the design of the high war crab, but the proportion is smaller, more flat and simple.
On the back of the body, the dorsal fin is also added.
Where the arms connect to the body, spherical joints similar to those of the turtle are used to splice them.
Then came the hand making.
After all, it is a dual-use airframe, the longer arm seems to be more in line with the characteristics of the body, and this long arm shape is also like the setting of a high war crab.
The palm part is modeled with reference to the palm shape of the frog, and the finger joints can also be moved, full of creativity.
After the arm is completed, it is necessary to continue to complete the design of the body part, and the power tube is added here in the abdomen, which has a similar mechanism on many MS, and the power tube here is also designed with the shape of the abdomen.
On the back, a simple backpack was made, which is also a typical setting for water equipment, and the torpedo shape.
Next up is the main part of the waist, with the leg interface reserved on both sides, and the built-in heat dissipation device at the bottom.
The legs are slightly less complex than the arms, and the connection between the thighs and the body is still a large spherical joint.
Although the legs are short, there is still room for movement, and the knee part can be rotated. The little feet are also movable.
After the basic parts of the fuselage are modeled, it is necessary to add a notch line to improve the details on the outer armor, and for such a body, such an outer armor engraving line is just right.
Finally, let's revisit the only finished coating, the texture is also super strong, the classic aquatic color coating.