Decoration must not try to save trouble, must be dead to cut the details! Taking it for granted that renovation will eventually backfire.
This is the conclusion I came to after visiting the rollover site of netizens and combining my own experience.
I believe that after watching these renovation and overturning sites, everyone will also feel empathy and can learn a lot of lessons from them.
Wrong seam
Seams
Wall tiles and floor tiles have no seams, although they have no impact on living, but the overall effect can be said to be very different compared with the seams.
Especially when zoomed in, the misalignment of the tiles is obvious, and the longer the time, the higher the risk of empty drums.
The reason is that, on the one hand, the master's craftsmanship is not in place, and the plan is to save trouble; on the other hand, it is not doing a good job of supervision.
@Recommended
Before pasting bricks, communicate with the master to lay the details, try to refine the process, even if you add more money, you must do it in place, so as not to have an effect in the future and feel uncomfortable.
In addition, when you paste the bricks, you must be there to supervise the work! Let the master follow the design stickers drawn by the tile shop, do not cut the bricks casually, and avoid unnecessary wear and tear.
There is a gap between the tile and the floor, it must be closed, and now the more popular practice is to use a very narrow edge strip, the effect is good, simple and beautiful.
But this kind of minimalist edge collection is a meticulous work, most of the masters are not fine, hastily closed, not flat at all, it looks ugly.
Extremely narrow edge strips can be purchased online, as long as the size is suitable, the material tone and floor are uniform, and the effect will not be too bad after laying.
Still keep an eye on the master's workmanship. Some masters are afraid of trouble and will say that minimalist mouth can not be done. Don't listen to him, don't directly change a master who can do it, the details are in place, the effect is very good.
The height of the socket is not aligned, and there is an embarrassing situation that cannot be used...
In fact, most people are also making this mistake, focusing only on the number of sockets, but ignoring details such as height and size.
When the water and electricity transformation, personally come to the scene to paint the location and height of the socket to the wall, experience it, not suitable for timely adjustment, and later select furniture and home appliances according to the height of the socket, you can avoid the occurrence of the above events.
Convert the socket
Universal magic socket
If the renovation has been completed and the position cannot be adjusted, it is recommended to replace the socket. With the five-hole slope or the thin conversion socket, it can improve the convenience of use.
The sealing edge of the cabinet body is not in place, and the situation of bursting edges has occurred after a long time
To the top cabinet body of the sealing plate and cabinet body color is inconsistent, ugly out of the sky;
The quality of the hardware is not good, and the cabinet door falls down in less than half a month...
The root cause of these problems is the neglect of details. Therefore, when customizing the wardrobe, communicate the details with the designer:
(1) The color of the cabinet sealing plate should be consistent with the box; including the side as much as possible with the plate decoration, directly exposing the box, but also affects the aesthetics
(3) The plate must be edge banded!!!
Not only for durability and aesthetics, with edge banding, but also effectively prevent the release of formaldehyde from the sheet. Choosing PUR hot melt edge banding is enough, not bad money to choose laser edge banding, the effect is better.
Long strips of floor drains have been very popular in recent years, and many people have followed the wind, and the result has been a piece of overturning... Either the design is not in place, or there is a problem when using it.
First of all, to clarify a little, the long strip of leak sewers is the same as ordinary floor drains, there is only one, just the area of the sewage is increased, giving people the illusion of fast water.
There are many corners and corners, hiding dirt and grime
In fact, when used, there is no difference from ordinary floor drains. Moreover, the strip floor drain has more dead ends than traditional floor drains and is more difficult to clean.
@Suggestion:
If you want a long strip of floor drain, when doing water and electricity, you must plan the location of the water, the size of the floor drain, the size of the tiles, the way of laying, etc., do not wait for the final installation of the floor drain, only to find the problem.
Of course, individuals still recommend doing the traditional floor drain. Do a good job of the inlet and slope, do not worry about the problem of blockage and slow launch, and it is convenient to clean in the future. (Note: there must be floor drains in the wet and dry areas)
Stuffing a regular refrigerator in a custom cabinet, is that the case with your refrigerator? If so, congratulations on making a "fake embedded" refrigerator.
Such a fake embedded in the refrigerator, the outside of a large section of the protruding, affecting the aesthetics; the four sides leave a heat dissipation gap, it is easy to hide dirt and dirt, the practicality is very low.
What is a true embedded refrigerator? After the refrigerator is embedded, it forms a plane with the cabinet body, which is tightly sewn, without bulging, saving space;
The heat dissipation port is on the top surface or the bottom side, the active exhaust air does not affect the operation; the outer side can be installed with a cabinet door, which can be more complete with the cabinet.
To be honest, most of the built-in refrigerators on the market are not correct. It's just a pretense for merchants to meet the needs of the public.
If you want to hide the ordinary refrigerator in the cabinet completely, you need to dismantle the wall in advance, make grooves, or make the thickness of the cabinet consistent with the refrigerator, otherwise there will be protrusions.
Moreover, even if you do this, you can't make the refrigerator and the cabinet tightly sewn, and it is difficult to do hygiene in the later stage.
Therefore, if the embedding conditions are not met, do not blindly make a built-in refrigerator.
It is okay to want the refrigerator to be next to the cabinet, but it is best to make a style that is left empty on one side. Not only good-looking, but also easy to use, does not affect the heat dissipation.
Decoration is a technical work, but also a test of patience and care. Don't be afraid of trouble, you must do a good job to the extreme, so that you can make your home more comfortable!
(The image comes from the Internet, if there is infringement, it will be deleted immediately)