100BASE-T1 USB Converter——100Base-T1和USB之間全雙工轉換
The USB 100BASE-T1 Converter from Technica Engineering allows you to expand your PC/Laptop with an additional Network Interface Card with the in-built USB-LAN chip and to interact directly with your 100BASE-T1 (a.k.a. BroadR-Reach ™) device with only one device. The power supply for the converter is provided by the USB port.
來自Technica Engineering的100BASE-T1 USB轉換器允許您使用内置USB-LAN晶片來擴充您的PC /筆記本電腦網絡接口，并與您的100BASE-T1（也稱為BroadR-Reach™）裝置直接互動 。 轉換器的電源由USB端口提供。
Windows and Linux drivers available.
提供Windows和Linux驅動程式。
It uses the widely used micro-USB and one Broadcom BCM 89811 phy.
它使用廣泛使用的micro-USB和一個Broadcom BCM 89811 phy。
Thus the USB 100BASE-T1 Converter is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.
是以，100BASE-T1 USB轉換器是使用新型100BASE-T1技術快速高效工作的理想解決方案。
Feature産品特點
-
Converts 100Base-T1 100 MBit/s full duplex 1x unshielded twisted pair (UTP) to USB-LAN
将100Base-T1信号全雙工方式以非屏蔽雙絞線轉換到USB-LAN
-
Master/slave configuration through a windows tool(Linux driver available)
通過windows工具進行主從配置（也提供Linux驅動）
-
Status LEDs
狀态燈
-
Standard Tyco MQS Connector(100BASE-T1)
标準Tyco MQS接插件(100BASE-T1)
-
Standard USB Connector
标準USB接插頭
-
Power requirement: 5V DC provided from USB 2.0,No additional power supply Needed
電源需求：5V，由USB2.0供電,不需額外供電
-
Small :60 x 42 x 19mmSmall
尺寸：604219毫米
User Case 使用案例
- 通過100Base-T1 USB Converter,上位機和控制器實作雙向通信
車載以太網-100BASE-T1 USB Converter - 通過100Base-T1 USB Converter,上位機得以擴充多個以太網網口，進而實作節點仿真
車載以太網-100BASE-T1 USB Converter