用SQL語句添加删除修改字段
1.增加字段
alter tabledocdsp adddspcode
char(200)
2.删除字段
ALTER TABLE table_NAME DROP COLUMN
column_NAME
3.修改字段類型
ALTER TABLEtable_name ALTER COLUMN
column_name new_data_type
4.sp_rename 改名
更改目前資料庫中使用者建立對象(如表、列或使用者定義資料類型)的名稱。
文法
sp_rename [@objname = ]
'object_name' ,
[ @newname = ] 'new_name'
[ , [ @objtype =
] 'object_type' ]
如:EXECsp_rename
'newname','PartStock'
5.sp_help 顯示表的一些基本情況
sp_help'object_name'
如:EXECsp_help 'PartStock'
6.判斷某一表PartStock中字段PartVelocity是否存在
if
exists (select * from syscolumns where
id=object_id('PartStock') and name='PartVelocity')
'PartVelocity exists'
else print 'PartVelocity not
exists'
另法:
判斷表的存在性:
selectcount(*) from sysobjects where type='U'
and name='你的表名'
判斷字段的存在性:
selectcount(*) from syscolumns
where
id = (select id from sysobjects where type='U' and name='你的表名')
and name = '你要判斷的字段名'
一個小例子
--假設要處理的表名為:
tb
--判斷要添加列的表中是否有主鍵
if exists(select 1 from sysobjects where
parent_obj=object_id('tb') and xtype='PK')
begin
'表中已經有主鍵,列隻能做為普通列添加'
--添加int類型的列,預設值為0
alter table tb add 列名 int default
end
else
begin
print '表中無主鍵,添加主鍵列'
--添加int類型的列,預設值為0
alter
table tb add 列名 int primary key default 0
end
7.随機讀取若幹條記錄
Access文法:SELECT top 10 * From 表名 ORDER BY
Rnd(id)
Sql server:select top n * from 表名 order by newid()
mysql select * From 表名 Order By rand() Limit n
8.說明:日程安排提前五分鐘提醒
SQL:
select * from 日程安排 wheredatediff(minute,f開始時間,getdate())>5
9.前10條記錄
select top 10 * form table1 where 範圍
10.包括所有在 TableA 中但不在 TableB和TableC 中的行并消除所有重複行而派生出一個結果表
(select a
from tableA ) except (select a from tableB) except (select a fromtableC)
11.說明:随機取出10條資料
select top 10 * from tablename order by newid()
12.列出資料庫裡所有的表名
select name from sysobjects where type=U
13.列出表裡的所有的字段名
select name from syscolumns where
id=object_id(TableName)
14.說明:列示type、vender、pcs字段,以type字段排列,case可以友善地實作多重選擇,類似select
中的case。
select type,sum(case vender when A then pcs else 0
end),sum(case vender when C then pcs else 0 end),sum(case venderwhen B then pcs
else 0 end) FROM tablename group by type
15.說明:初始化表table1
TRUNCATE
TABLE table1
16.說明:幾個進階查詢運算詞
A: UNION 運算符
UNION 運算符通過組合其他兩個結果表(例如
TABLE1 和 TABLE2)并消去表中任何重複行而派生出一個結果表。當 ALL 随 UNION 一起使用時(即UNION
ALL),不消除重複行。兩種情況下,派生表的每一行不是來自 TABLE1 就是來自 TABLE2。
B: EXCEPT 運算符
EXCEPT 運算符通過包括所有在 TABLE1 中但不在 TABLE2
中的行并消除所有重複行而派生出一個結果表。當 ALL 随 EXCEPT 一起使用時 (EXCEPTALL),不消除重複行。
C: INTERSECT 運算符
INTERSECT 運算符通過隻包括 TABLE1 和 TABLE2
中都有的行并消除所有重複行而派生出一個結果表。當 ALL 随 INTERSECT 一起使用時 (INTERSECT
ALL),不消除重複行。
注:使用運算詞的幾個查詢結果行必須是一緻的。 17.說明:線上視圖查詢(表名1:a )
select * from (SELECT a,b,c FROM a) T where
t.a > 1;
18.說明:between的用法,between限制查詢資料範圍時包括了邊界值,not between不包括
select * from
table1 where time between time1 and time2
select a,b,c, from table1
where a not between 數值1 and 數值2
19.說明:in 的使用方法
select * from table1 where a [not] in
(‘值1’,’值2’,’值4’,’值6’)
20.說明:兩張關聯表,删除主表中已經在副表中沒有的資訊
delete from table1 where not exists (
select * from table2 where table1.field1=table2.field1
)
21. 說明:複制表(隻複制結構,源表名:a 新表名:b) (Access可用)
法一:select * into b from a
where 1<>1
法二:select top 0 * into b from a
22.說明:拷貝表(拷貝資料,源表名:a 目标表名:b) (Access可用)
insert into b(a, b, c)
select d,e,f from b;
23.說明:跨資料庫之間表的拷貝(具體資料使用絕對路徑) (Access可用)
insert into b(a, b, c)
select d,e,f from b in ‘具體資料庫’ where 條件
例子:..from b in
"&Server.MapPath(".")&"\data.mdb"&" where..
24.建立資料庫
CREATE DATABASE database-name
25.說明:删除資料庫
drop database dbname
26.說明:備份sql server
--- 建立
備份資料的 device
USE master
EXEC sp_addumpdevice disk, testBack,
c:\mssql7backup\MyNwind_1.dat
--- 開始 備份
BACKUP DATABASE pubs TO testBack
27.說明:建立新表
create table tabname(col1 type1 [not null] [primary
key],col2 type2 [not null],..)
根據已有的表建立新表:
A:create table tab_new
like tab_old (使用舊表建立新表)
B:create table tab_new as select col1,col2…
from tab_old definition only
28.說明:
删除新表:drop table tabname
29.說明:
增加一個列:Alter table tabname add column col
type
注:列增加後将不能删除。DB2中列加上後資料類型也不能改變,唯一能改變的是增加varchar類型的長度。
30.說明:
添加主鍵:Alter table tabname add primary key(col)
說明:
删除主鍵:Alter table tabname drop primary key(col)
31.說明:
建立索引:create [unique] index idxname on tabname(col….)
删除索引:drop index idxname
注:索引是不可更改的,想更改必須删除重建立。
32.說明:
建立視圖:create view viewname as select statement
删除視圖:drop view
viewname
33.說明:幾個簡單的基本的sql語句
選擇:select * from table1 where 範圍
插入:insert into
table1(field1,field2) values(value1,value2)
删除:delete from table1 where
範圍
更新:update table1 set field1=value1 where 範圍
查找:select * from table1
where field1 like ’%value1%’ ---like的文法很精妙,查資料!
排序:select * from table1
order by field1,field2 [desc]
總數:select count * as totalcount from
table1
求和:select sum(field1) as sumvalue from table1
平均:select
avg(field1) as avgvalue from table1
最大:select max(field1) as maxvalue from
table1
最小:select min(field1) as minvalue from table1 注:删除某表中某一字段的預設值(先查詢出此字段預設值限制的名字,然後将其删除即可) 1.查詢字段預設值限制的名字(t1為表名,id為字段名) selecta.name as 使用者表,b.name as 字段名,d.name as字段預設值限制
from sysobjects a,syscolumns b,syscomments c,sysobjects d
where a.id=b.id and b.cdefault=c.id andc.id=d.id
and a.name='t1' and b.name='id' 2.将id字段的預設值限制删除(DF_t1_id為限制名字) alter table t1 DROP CONSTRAINT DF_t1_id 修改字段預設值
--(1)檢視某表的某個字段是否有預設值限制 select a.name as 使用者表,b.name as 字段名,d.name as 字段預設值限制 from sysobjects a inner join syscolumns b on (a.id=b.id) inner join syscomments c on ( b.cdefault=c.id ) inner join sysobjects d on (c.id=d.id) where a.name='tb_fqsj'and b.name='排污口号' --(2)如果有預設值限制,删除對應的預設值限制 declare @tablename varchar(30) declare @fieldname varchar(50) declare @sql varchar(300) set @tablename='tb_fqsj' set @fieldname='排污口号' set @sql='' select @[email protected]+' alter table ['+a.name+'] drop constraint['+d.name+']' from sysobjects a join syscolumns b ona.id=b.id join syscomments c onb.cdefault=c.id join sysobjects d onc.id=d.id where [email protected] and [email protected] exec(@sql) --(3)添加預設值限制 ALTER TABLE tb_fqsj ADD DEFAULT ('01') FOR 排污口号 WITH VALUES --建立表及描述資訊 create table 表(a1 varchar(10),a2 char(2)) --為表添加描述資訊 EXECUTE sp_addextendedproperty N'MS_Description', '人員資訊表', N'user', N'dbo', N'table', N'表', NULL, NULL --為字段a1添加描述資訊 EXECUTE sp_addextendedproperty N'MS_Description', '姓名', N'user', N'dbo', N'table', N'表', N'column', N'a1' --為字段a2添加描述資訊 EXECUTE sp_addextendedproperty N'MS_Description', '性别', N'user', N'dbo', N'table', N'表', N'column', N'a2' --更新表中列a1的描述屬性: EXEC sp_updateextendedproperty 'MS_Description','字段1','user',dbo,'table','表','column',a1 --删除表中列a1的描述屬性: EXEC sp_dropextendedproperty 'MS_Description','user',dbo,'table','表','column',a1 --删除測試 drop table 表 |