Expert analysis laser carving techniques little common sense

Using laser engraving and cutting, the process is very simple, as the use of computers and printers on paper for printing. You can WinXP/Win98 / Win2000 environment by using various graphics processing software, such as design, CorelDraw scan vector graphics, the graphic and various CAD file can be easily "print" to carving machine. The only difference is, printed on paper will toner onto, laser engraving is laser will shoot to wood, metal, plastic, ratnayake board, stone etc. Almost all of the above material.

According to the different laser carving carving mode can be divided into the bitmap engraving and cutting: the bitmap carving vector lattice sculpture resembles a high-resolution matrix printed. Misbalanced swinging, each carved by a series of line, move up and down and then misbalanced carved multiple lines, and finally form the whole image or text. The text and graphics, scan vector quantization graphic can use bitmap sculpture. Vector matrix and different cutting, carved in the cutting and vector contour line outside. We often use this mode in wood, paper etc, ratnayake materials through cutting, also can be in various material surface marking operation.

A carving machine performance, which mainly consists of sculpture speed, strength and spot size and carving. Carving speed refers to the movement speed, usually misbalanced by IPS (inches/SEC), high speed, high production efficiency. Speed is used to control the depth of cut, for a particular laser intensity, the slower the depth of the sculpture, cutting or greater. You can adjust speed, carving machine panel also available computer print driver to adjust. In 1% to 100%, within the scope of the adjustment range is 1%. Hummers machine advanced motion control system can make you in high-speed carving, still get hyperfine sculptures carved strength quality. Carved into refers to the intensity of laser surface strength. In particular, the speed of the sculpture, cutting depth of sculpture or greater. You can adjust strength carving machines, also can use face of computer print driver to adjust. In 1% to 100%, within the scope of the adjustment range is 1%. The speed of the equivalent. Cutting depth and the deep spot size beam spot size can adjust different focus lens. Little flare lens used for high resolution of sculpture. Large spot for low resolution of the lens of the sculpture, but for vector cutting, it is the best choice. The standard configuration is new equipment of lens. 2.0" The spot size in the middle, is suitable for various occasions.

General carving machine can be carved the following data: wood, organic glass, metal, glass and stones, crystal, but li resistance, paper, double color boards, alumina, leather, metal, resin coating.