华为AP3010DN-AGN升级为胖AP

本文简要介绍了华为AP 3010DN-AGN转换为自主AP的过程。包括VRP的获取、升级。

FAT AP的VRP文件下载

技术支持--无线局域网--AP--AP型号， 找到软件，在 按产品型号查找那里选择 以AP型号开头，FAT结尾的版本。

http://support.huawei.com/enterprise/zh/wlan/ap3000-pid-21946538/software

一、先从华为网站上下载FAT AP的bin文件

二、准备好本机做为TFTP服务器

三、执行命令

[e8bd-d1f9-7880]ap-mode-switch prepare

Info: Prepare is ok, Use ap-mode-switch command to switch to fat ap.

[e8bd-d1f9-7880]ap-mode-switch check

Info: Ap-mode-switch check ok.

[e8bd-d1f9-7880]ap-mode-switch tftp FatAP3X10XN_V200R005C10SPCa00.bin 169.254.1.2

Info: Preparing to upgrade. Please wait a moment .............

Warning: Do Not Power-off!

.........................................................................................................................................................................

Info: Upgrade upgrade-assistant-package succeeded.

Warning: System will reboot, if you want to switch to upgrade-assistant-package.

Are you sure to execute these operations ? [Y/N]:y

四、重启后

默认密码： admin/[email protected]

<Huawei>display version

Huawei Versatile Routing Platform Software

VRP (R) software, Version 5.160 (AP3010DN FAT V200R005C10SPCa00)

Copyright (C) 2011-2015 HUAWEI TECH CO., LTD

Huawei AP3010DN Router uptime is 0 week, 0 day, 5 hours, 25 minutes

MPU 0(Master) : uptime is 0 week, 0 day, 5 hours, 25 minutes

SDRAM Memory Size : 128 M bytes

Flash Memory Size : 32 M bytes

MPU version information :

1. PCB Version : H85D2TD1D200 VER.B

2. MAB Version : 0

3. Board Type : AP3010DN

4. BootROM Version : 223

<Huawei>

五、查看AP的IP地址

Huawei>display ip int brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

(E): E-Trunk down

The number of interface that is UP in Physical is 2

The number of interface that is DOWN in Physical is 0

The number of interface that is UP in Protocol is 2

The number of interface that is DOWN in Protocol is 0

Interface IP Address/Mask Physical Protocol

NULL0 unassigned up up(s)

Vlanif1 169.254.1.1/16 up up

六、 主机与AP能直接通信

<Huawei>ping 169.254.1.2

PING 169.254.1.2: 56 data bytes, press CTRL_C to break

Reply from 169.254.1.2: bytes=56 Sequence=1 ttl=128 time=519 ms

Reply from 169.254.1.2: bytes=56 Sequence=2 ttl=128 time=1 ms

Reply from 169.254.1.2: bytes=56 Sequence=3 ttl=128 time=1 ms

Reply from 169.254.1.2: bytes=56 Sequence=4 ttl=128 time=1 ms

Reply from 169.254.1.2: bytes=56 Sequence=5 ttl=128 time=1 ms

七、 配置AP

http://support.huawei.com/enterprise/zh/doc/EDOC1000092153?idPath=7919710%7C21782164%7C21782201%7C22318525%7C21946538

使用配置向导进行配置，需要设置

需要设置一个新的配置射频 即2.4G和5G都进行配置。

华为配置向导比较简单，照着一步一步操作即可。

转载于:https://blog.51cto.com/liu008qing/2153448