1. 概述
本文主要分享 HystrixGatewayFilterFactory 的代码实现。
在 《Spring-Cloud-Gateway 源码解析 —— 过滤器 (4.2) 之 GatewayFilterFactory 过滤器工厂》 一文中,我们看到 Spring Cloud Gateway 提供了多种 GatewayFilterFactory 的实现,而 HystrixGatewayFilterFactory 也是其中的一种。
通过 HystrixGatewayFilterFactory ,可以创建 HystrixGatewayFilter ( 实际是内部匿名类,为了表述方便,下面继续这么称呼 ) 。
HystrixGatewayFilter 使用 Hystrix ,实现基于 Route 级别的熔断功能。
这里,笔者一本正经的推荐下自己分享的 《Hystrix 源码解析系列》 ,简直业界良心。
2. 环境搭建
第一步,以
spring-cloud-gateway-sample
项目为基础,在
pom.xml
文件添加依赖库。
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-starter-netflix-hystrix</artifactId>
</dependency>
第二步,在
application.yml
配置一个 RouteDefinition 。
spring:
cloud:
gateway:
routes:
# =====================================
- id: default_path_to_httpbin
uri: http://127.0.0.1:8081
order: 10000
predicates:
- Path=/**
filters:
- Hystrix=myCommandName
-
,配置 HystrixGatewayFilterFactory ,并以- Hystrix=myCommandName
为 Hystrix Command 名字。myCommandName
第三步,配置完成,启动
spring-cloud-gateway-sample
项目。
3. HystrixGatewayFilterFactory
org.springframework.cloud.gateway.filter.factory.HystrixGatewayFilterFactory
,熔断网关过滤器工厂。代码如下 :
1: public class HystrixGatewayFilterFactory implements GatewayFilterFactory {
2:
3: @Override
4: public List<String> argNames() {
5: return Arrays.asList(NAME_KEY);
6: }
7:
8: @Override
9: public GatewayFilter apply(Tuple args) {
10: //TODO: if no name is supplied, generate one from command id (useful for default filter)
11: final String commandName = args.getString(NAME_KEY);
12: final HystrixCommandGroupKey groupKey = HystrixCommandGroupKey.Factory.asKey(getClass().getSimpleName());
13: final HystrixCommandKey commandKey = HystrixCommandKey.Factory.asKey(commandName);
14:
15: final HystrixObservableCommand.Setter setter = HystrixObservableCommand.Setter
16: .withGroupKey(groupKey)
17: .andCommandKey(commandKey);
18:
19: return (exchange, chain) -> {
20: RouteHystrixCommand command = new RouteHystrixCommand(setter, exchange, chain);
21:
22: return Mono.create(s -> {
23: // 使用 Hystrix Command Observable 订阅
24: Subscription sub = command.toObservable().subscribe(s::success, s::error, s::success);
25: // Mono 取消时,取消 Hystrix Command Observable 的订阅,结束 Hystrix Command 的执行
26: s.onCancel(sub::unsubscribe);
27: }).onErrorResume((Function<Throwable, Mono<Void>>) throwable -> {
28: if (throwable instanceof HystrixRuntimeException) {
29: HystrixRuntimeException e = (HystrixRuntimeException) throwable;
30: if (e.getFailureType() == TIMEOUT) { //TODO: optionally set status
31: setResponseStatus(exchange, HttpStatus.GATEWAY_TIMEOUT);
32: return exchange.getResponse().setComplete();
33: }
34: }
35: return Mono.empty();
36: }).then();
37: };
38: }
39: }
-
方法,定义了 Tuple 参数的 Key 为#argNames()
。name
-
方法,创建 HystrixGatewayFilter 对象。#apply()
- 第 11 行 :从 Tuple 参数获得 Hystrix Command 名字,例如上面举例的 RouteDefinition 时,
。commandName = myCommandName
- 第 12 行 :创建 Hystrix Command 分组 Key 为
。HystrixGatewayFilterFactory
- 第 13 行 :创建 Hystrix Command Key 为
。commandName
- 第 15 至 17 行 :创建 HystrixObservableCommand.Setter 对象。
- ——— 第 19 至 37 行 :创建 HystrixGatewayFilter 对象并返回。
- 第 20 行 :创建 RouteHystrixCommand 对象。代码如下 :
private class RouteHystrixCommand extends HystrixObservableCommand<Void> {
private final ServerWebExchange exchange;
private final GatewayFilterChain chain;
RouteHystrixCommand(Setter setter, ServerWebExchange exchange, GatewayFilterChain chain) {
super(setter);
this.exchange = exchange;
this.chain = chain;
}
@Override
protected Observable<Void> construct() {
return RxReactiveStreams.toObservable(this.chain.filter(this.exchange));
}
}
- 第 22 至 26 行 :调用
方法,创建 Mono 对象。点击 传送门 查看该方法详细说明。因为 Hystrix 基于 RxJava ,而 GatewayFilter 基于 Reactor ( Mono 是其内部的一个类 ),通过这个方法,实现订阅的适配。未来,会实现 HystrixMonoCommand 替换 HystrixObservableCommand ,从而统一订阅,去除适配代码。Mono#create(Consumer<MonoSink<T>>)
- 第 24 行 :1)调用
方法,内部会调用RouteHystrixCommand#toObservable()
方法,获得执行RouteHystrixCommand#construct()
的 Observable 。2)订阅 Observable :成功或完成时,调用this.chain.filter(this.exchange)
方法,目前创建的 Mono 上没有相关的订阅;异常时,调用Mono#success(Object)
方法,目前创建的 Mono 上调用Mono#error(Object)
方法,进行订阅。Mongo#onErrorResume(Function<Throwable, Mono<Void>>))
- 第 26 行 :Mono 取消时,取消 Hystrix Command Observable 的订阅,结束 Hystrix Command 的执行。
- 第 24 行 :1)调用
- 第 27 至 34 行 :当 Hystrix Command 执行超时时,设置响应 504 状态码,并回写客户端响应(
) 。exchange.getResponse().setComplete()
- 第 35 行 :当 Hystrix Command 发生其他异常时,例如断路器打开,返回
,最终返回客户端 200 状态码,内容为空。Mono.empty()
- 第 36 行 :调用
方法,参数为空,返回空 Mono ,不再向后发射数据。Mono#then()
4. 注意事项
- 目前 Hystrix Command 执行超时时,返回客户端 504 状态码,如果使用 JSON 格式作为数据返回,则需要修改下该 HystrixGatewayFilter 的代码实现。
- 当 Hystrix 熔断时,最终返回客户端 200 状态码,内容为空,此处建议该 HystrixGatewayFilter 的代码实现。