CSDN | GitHub |
---|---|
GDB实用插件(peda, gef, gdbinit)全解 | |
本作品采用知识共享署名-非商业性使用-相同方式共享 4.0 国际许可协议进行许可, 转载请注明出处, 谢谢合作
1 GDB插件配置与实用.gdbinit
当
GDB
(即
GNU Project Debugger
)启动时, 它在当前用户的主目录中寻找一个名为
.gdbinit
的文件; 如果该文件存在, 则
GDB
就执行该文件中的所有命令. 通常, 该文件用于简单的配置命令, 如设置所需的缺省汇编程序格式(
Intel®
或
Motorola
) 或用于显示输入和输出数据的缺省基数(十进制或十六进制). 它还可以读取宏编码语言, 从而允许实现更强大的自定义. 该语言遵循如下基本格式:
define <command>
<code>
end
document <command>
<help text>
end
- 本文并不详细说明
的语法, 我们只是提供一些从各路大神摘来的配置信息..gdbinit
-
的配置繁琐, 因此某些大神想到了用插件的方式来实现, 通过.gdbinit
的脚本可以很方便的实现我们需要的功能Python
2 gdb
插件和配置信息
gdb
2.1 peda
项目 https://github.com/longld/peda
安装
git clone https://github.com/longld/peda.git ~/peda
echo "source ~/peda/peda.py" >> ~/.gdbinit
其实就是下载完成后, 将
source ~/peda/peda.py
写入
~/.gdbinit
2.2 gef插件
地址 https://github.com/hugsy/gef
安装
# via the install script
#下载 `gef.sh` 并执行
wget -q -O- https://github.com/hugsy/gef/raw/master/gef.sh | sh
# manually
# 下载 `gef.py`, 并将其 `source` 写入 `.gdbinit`
wget -q -O ~/.gdbinit-gef.py https://github.com/hugsy/gef/raw/master/gef.py
echo source ~/.gdbinit-gef.py >> ~/.gdbinit
可见
gef.sh
的工作其实就是将
gef.py
下载下来, 并将环境变量写入
.gdbinit
2.3 gdbinit配置信息
我们也可以从网上或自己编写
.gdbinit
配置文件, 我们从网上找到一份配置
地址 https://github.com/gdbinit/Gdbinit
安装
git clone [email protected].com:gdbinit/Gdbinit.git
cp Gdbinit/gdbinit ~/.gdbinit
或者
wget https://raw.githubusercontent.com/gdbinit/Gdbinit/master/gdbinit
cp gbdinit ~/.gdbinit
3 总结
我把前面三个项目组合在一起
地址 : https://github.com/gatieme/GdbPlugins
git clone [email protected]:gatieme/GdbPlugins.git ~/.GdbPlugins
使用
# 使用 peda
echo "source ~/.GdbPlugins/peda/peda.py" > ~/.gdbinit
# 使用 gef
echo "source ~/.GdbPlugins/gef/gef.py" > ~/.gdbinit
#使用 gdbinit
echo "source ~/.GdbPlugins/gdbinit/gdbinit" > ~/.gdbinit
4 参考
CTF工具集合安装脚本操作姿势
gdb插件gef安装爬坑
本作品采用知识共享署名-非商业性使用-相同方式共享 4.0 国际许可协议进行许可, 转载请注明出处, 谢谢合作.