uvcvideo: Failed to query (135) UVC control 11 (unit 5)

View Full Version : [all variants] SOLVED: XPS M1330 Hardy: UVC module fails to initialize webcam

argotnaut May 13th, 2008, 09:14 PM (x-posted from http://www.dellcommunity.com/supportforums/board/message?board.id=sw_linux&thread.id=13835)

---

I did a clean install of Hardy on an XPS M1330 with the thin display/UVC webcam. It worked fine in Gutsy, but now it won't work at all. Here's the relevant section of dmesg output:

[ 20.719793] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:7670)

[ 20.720088] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).

[ 20.720337] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).

[ 20.720340] uvcvideo: Failed to initialize the device (-5).

[ 20.720371] usbcore: registered new interface driver uvcvideo

[ 20.720374] USB Video Class driver (v0.1.0)

---

Found more information on the problem here: http://developer.berlios.de/feature/?func=detailfeature&feature_id=3737&group_id=5681

---

And fixed it by installing the latest UVC module from svn:

1. install prereqs if you don't have them

sudo aptitude install subversion build-essential

2. back up current module, just in case

sudo cp /lib/modules/2.6.24-16-generic/ubuntu/media/usbvideo/uvcvideo.ko /lib/modules/2.6.24-16-generic/ubuntu/media/usbvideo/uvcvideo.ko.bak

3. Check out latest source code

svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk

4. go to the 'trunk' directory

cd trunk

5. Edit Makefile

nano Makefile (or use gedit or whatever you like)

6. Change the line starting with INSTALL_MOD_DIR to this:

INSTALL_MOD_DIR := /lib/modules/$(KERNEL_VERSION)/ubuntu/media/usbvideo

7. Install it

make

sudo make install

8. Reboot (you could also unload the old module and load the new one, but I didn't remember the command off the top of my head, and I'm lazy)

dmesg still gave me a "Failed to query" line (see below), but everything works now! Tested in Cheese and Ekiga.

[ 20.749569] Linux video capture interface: v2.00

[ 20.822180] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:7670)

[ 20.822549] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).

[ 20.870964] input: PC Speaker as /devices/platform/pcspkr/input/input13

[ 20.881187] usbcore: registered new interface driver uvcvideo

[ 20.881192] USB Video Class driver (v0.1.0) akniss May 13th, 2008, 10:14 PM That's odd... I have a m1330 with LED backlight screen and VGA webcam and I didn't have to do anything. My webcam works out of the box (tested on Ekiga and Skype) on Gutsy and with a fresh install of Hardy. primski May 14th, 2008, 04:29 AM I have an Inspiron 1525 and whenever i resume laptop from suspend, there is some UVC error for a brief moment I haven't catched yet, and the computer beeps 3, 4 times very loudly and then unsuspends normally. Webcam works though.

Will try compiling the new UVC module, and see it that makes any difference. Keyper7 May 14th, 2008, 02:37 PM Heh, didn't test Hardy yet, but I think Gutsy on my Vostro 1400 is the weirdest case around here: sometimes it works, sometimes I get the exact same error argotnaut posted. It seems completely random. This smells of race condition. ameeno July 7th, 2008, 09:57 AM Wow.. this worked. Thanks!!!!!!!!!

didnt know why my webcam wasnt working before this.

ok just a tip to everyone to save a few mins

the remove command is

sudo modprobe -r uvcvideo

then do

sudo modprobe uvcvideo

to reactivate the moded file.. there we go all works well! DiabolusItalicus July 7th, 2008, 06:13 PM Well, argotnaut, believe it or not, your crystal clear instructions also solved the problem I was having with the integrated webcam of my Dell 22" monitor SP2208WFP!!!

And thanks also to ameeno for saving me a reboot...

Thanks guys for proving me every single day how abyss-deep my knowledge of Linux and Ubuntu is, and even more thanks for relieving it with your sky-high knowledge!!!

Regards from Italy, and may Ubuntu and its community live forever. Thorndog October 11th, 2009, 11:21 PM I'm running Jaunty and after numerous attempts can get the webcam going by toggling modprobe -r and back again a few times like someone mentions here in the forums, not really a good sign I think!. I cannot seem to use the microphone though.

Any suggestions re maybe using ndwiswrapper or some generic mod to enable usb mic since I can see the usb hub.

output from dmesg

[ 15.770954] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05

[ 15.771105] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)

[ 15.771174] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 15.778802] uvcvideo: Found UVC 1.00 device Monitor Webcam (SP2208WFP) (05a9:2643)

[ 15.779158] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).

[ 15.779401] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).

[ 15.779405] uvcvideo: Failed to initialize the device (-5).

[ 15.779458] usbcore: registered new interface driver uvcvideo

[ 15.779488] USB Video Class driver (v0.1.0)

[ 15.793398] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor

[ 15.794197] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input7

for what that's worth.

I downloaded drivers and have it all working under XP but I don't want to have to boot into xp to use Skype. Dangger October 25th, 2009, 09:56 AM I'm using karmic and my webcam stopped working. I have no

uvcvideo.ko

file in

/lib/modules/2.6.24-16-generic/ubuntu/media/usbvideo/

it is instead in:

/lib/modules/2.6.31-14-generic/kernel/drivers/media/video/uvc/uvcvideo.ko

Backup would be:

sudo cp /lib/modules/2.6.31-14-generic/kernel/drivers/media/video/uvc/uvcvideo.ko /lib/modules/2.6.31-14-generic/kernel/drivers/media/video/uvc/uvcvideo.ko.bak

INSTALL_MOD_DIR:

INSTALL_MOD_DIR := /lib/modules/$(KERNEL_VERSION)/kernel/drivers/media/video/uvc

Gonna wait until the final version of Karmic and if it's not solved on its own I'll try this method and report back.

UPDATE:

My issue is fixed. I installed Cheese, rebooted and it's fine. I did not follow the instructions here, I don't want to hijack the thread or anything but since it's working now I just wanted to let people know. DiabolusItalicus November 10th, 2009, 06:46 PM I'm using karmic and my webcam stopped working. [...]

UPDATE:

My issue is fixed. I installed Cheese, rebooted and it's fine. I did not follow the instructions here, I don't want to hijack the thread or anything but since it's working now I just wanted to let people know.

Hi Dangger,

I just updated to Karmic as well, and decided to take it up very seriously with the little b*****d webcam... (drum rolls, please!) for the first time ever since I bought my Dell monitor SP2208WFP (March 2008), its integrated webcam FINALLY STARTED TO WORK!!!

Now, the problem is that I'm totally unsure of how I did it... I mean:

After reading your post, I immediately tried to install Cheese, following our input: didn't work.

I then tried to modprobe -r/modprobe the uvcvideo kernel module, but the Koala replied to both commands with a (error?) message:

WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.

WARNING: All config files need .conf: /etc/modprobe.d/nvidia-kernel-nkc, it will be ignored in a future release.

so, given my abyss-deep knowledge of Ubuntu (and Linux) secrets, I simply didn't understand if I was actually succeeding in unloading/reloading the module.

I came back to Cheese to close it and restart it and... magic magic, I was there on my monitor, looking at myself in total amazement!!!

So, I have to conclude that, in spite of the cryptic (to me) Koala's messages, modprobing -r and re-modprobing the uvcvideo module actually seemed to work.

Let's see what will happen at the next restart...

Sweet dreams to all (almost midnight here).