配置海思Hi3559a的自启动项

配置Hisi的linux的自启动项的方法与x86的linux类似，自定义文件为

vi /etc/init.d/rcS
           

在文件最后添加

#dong add                                                                                                                                              
ifconfig eth0 10.25.16.123 netmask 255.255.255.0                                                                                                       
telnetd &                                                                                                                                              
mount -t nfs -o nolock -o tcp -o rsize=32768,wsize=32768 10.25.16.198:/root/share /mnt                                                                 
cd /mnt/ko                                                                                                                                             
./load3559av100_multicore -i                                                                                                                           
cd /mnt 
           

添加Qt支持

vi /etc/profile
           

在文件最后添加

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/cwf/install/lib

export LD_LIBRARY_PATH=/opt/lib
export QT_INSTALL_PATH=/opt/lib/Qt-lib
export LD_LIBRARY_PATH=/lib:/usr/lib:${QT_INSTALL_PATH}/lib:${QT_INSTALL_PATH}/plugins/platforms:${QT_INSTALL_PATH}/plugins/imageformats:${LD_LIBRARY_PATH}
export QT_QPA_FONTDIR=${QT_INSTALL_PATH}/lib/fonts
export QT_QPA_DISPLAY=linuxFB:/dev/fb0
export QT_DEBUG_PLUGINS=1
           

对于QT open gl的GPU显示加速，需要设置和编译mali_kbase.ko和hi_dbe.ko，待加。