3-2 三层组网AP上线-外接DHCP
一、实验目标
在3-1的基础上增加DHCP的配置方法
二、实验拓扑
三、实验配置
三层交换机
sysname coreSwitch
vlan batch 100 to 102
dhcp enable
interface Vlanif1
ip address 10.0.0.1 255.255.255.0
interface Vlanif100
ip address 10.0.100.254 255.255.255.0
interface Vlanif101
ip address 10.0.101.254 255.255.255.0
dhcp select relay
dhcp relay server-ip 10.0.0.254
interface Vlanif102
ip address 10.0.102.254 255.255.255.0
interface GigabitEthernet0/0/1
port link-type access
port default vlan 101
interface GigabitEthernet0/0/2
interface GigabitEthernet0/0/3
port default vlan 102
interface GigabitEthernet0/0/4
interface GigabitEthernet0/0/24
port default vlan 100
无线控制AC
ip address 10.0.100.1 255.255.255.0
ip route-static 0.0.0.0 0.0.0.0 10.0.100.254
capwap source interface vlanif 1
wlan
ap auth-mode no-auth
DHCP服务器
ip pool for101
gateway-list 10.0.101.254
network 10.0.101.0 mask 255.255.255.0
dns-list 1.1.1.1
option 43 sub-option 3 ascii 10.0.100.1
ip pool for102
gateway-list 10.0.102.254
network 10.0.102.0 mask 255.255.255.0
ip address 10.0.0.254 255.255.255.0
dhcp select global
ip route-static 10.0.100.0 255.255.255.0 10.0.0.1
ip route-static 10.0.101.0 255.255.255.0 10.0.0.1
ip route-static 10.0.102.0 255.255.255.0 10.0.0.1
四、验证
AC上检查ap的上线情况
dis ap all
