Nowadays, high-rise residential buildings are emerging in an endless stream, although there are more and more choices of housing, but many people have made difficulties in the choice of floors, after all, the height of the floor affects people's living comfort, if not selected, it may affect a lifetime, so in order to avoid regretting it, the floor choice can not be sloppy.
Usually, people will first avoid the first floor and the top floor, even if the price is relatively cheap, but the living disadvantages of these two floors are still quite large, there will be a lot of bad things after checking in, but in addition to the first floor and the top floor, these 4 floors should also pay special attention, maybe the living experience will be worse.
1. Second floor
Although the second floor is higher than the first floor, but its living comfort has not improved much, the lighting and ventilation effect is still very poor, especially now the developer in order to solve the problem of the first floor is difficult to sell, many have built shops, which will have a great impact on the second floor residents, such as noise interference, oil smoke pollution and so on. And no matter how high a building is, the first floor is independently launched, and the second floor is always the lowest point of the entire building, once the sewer pipe is blocked, it is easy to reverse the water, and the dirt will pour into the home, not only is it very troublesome to clean, but it may also have a great odor, which is very bad, so it is best not to touch the second floor unless necessary.
2. Channel steel layer
The bath layer is actually a floor paved with channel steel, which is now very common in the construction of high-rise residences, because it is mostly used to build a construction platform and place large equipment, if the construction is completed, the workers do not properly repair the holes left on the wall, then the late residence is prone to the problem of water leakage. And the channel steel layer is more than one layer, in order to reduce unnecessary trouble and capital expenditure, it is best to ask clearly before buying a house, try to avoid the channel steel layer, and better protect the living comfort of yourself and your family.
3. Equipment layer
Living in high-rise rooms, there are many auxiliary equipment that need to be used, such as elevator machine rooms, pressurized equipment, power supply equipment, pipeline wells, etc., although these equipment effectively guarantee people's life and travel, but these equipment will make a lot of noise when running, if it is affected by this for a long time, then the quality of life will be greatly reduced, in addition, some equipment will produce radiation, and even with a strong sense of shock, if you choose the equipment layer when buying a house, or the floor near the equipment layer, then it is very unfavorable to people's physical and mental health development.
4. Waist line layer
The main role of the waist line is to decorate, so that it will look more layered, the general waist line has a low layer, there are also in the high layer, but no matter in which layer, the waist line position will extend the wall outward part, and the protruding part may affect people's living experience. For example, if you buy the upper layer of the waist line, then the window sill is easy to accumulate ash, the late cleaning burden is very large, if the slope is not done well, it is easy to accumulate water, if the wall has cracks, then it is easy to penetrate into the home, destroy the interior decoration is beautiful, if the waist line is at a low level, then it will also provide the convenience of climbing for people with bad intentions, increasing the risk of theft. And if you buy the lower floor of the waist line, then it may affect the lighting effect of the room and affect the living comfort, so try to avoid the upper and lower floors of the waist line when buying a house.