<h1 class="pgc-h-arrow-right" data-track="1">
</h1>
The car can drive on the road because of the rotation of the wheels, what to do when the car is about to stop? It is impossible for the driver to put his foot on the ground to stop the car from advancing, as in the cartoon, so he has to rely on the brakes on the car to reduce the speed of the car and stop.
1. Brake on the downhill section
9 big brake skills, life and death speed of the highway
If you use the brakes for a long time while driving on a long downhill section, the braking system will affect the braking performance due to heat.
Therefore, according to the road conditions, the gear of the transmission can be selected in 3rd gear, 2nd gear, Lth gear or 3rd gear, 2nd gear, 1st gear, do not step on the accelerator pedal and use the engine brake to control the speed.
2. Long-distance braking
In the case of better road conditions, such as traffic lights at the intersection in front of you, the ideal braking state is that there is no sense of impact on the passengers. To do this, we must first make a judgment based on the traffic conditions on the road ahead.
If the distance is enough, you don't have to step on the brakes first, let the vehicle inertia maintain low speed taxiing, in order to save fuel economy; if not enough, start to lightly press the brakes after collecting oil to smooth the deceleration.
3. Emergency braking
If the vehicle does not have an ABS device, it is not recommended to press the brakes at one time, but to step on the brakes twice separately to prevent the wheel from tail swinging and direction locking after holding the wheel.
But now the ABS system is standard in vehicles, so if you have an emergency, be sure to press the brake pedal with all your might.
4. Anti-nod brake
Many novices do not have a good grasp of braking timing and braking force, and often the brakes will be more stiff.
If the braking distance is sufficient, please slowly and continuously press the brake pedal, decelerate evenly, and when the body tends to stop, slowly lift the brake pedal until it is completely released when it is stable.
Please keep two points in mind: one is to overcome the fear that the car will not stop hitting the car or obstacles in front of you; the other is to control the strength of the right foot.
5. Brakes on rainy days
The weather is unpredictable, and driving in the rain is a must-have lesson for every driver.
Rainy days on the owner's driving skills is a big test, first of all, when driving on rainy days not only affects the normal line of sight, and driving on rainy days is easy to make the braking system into the water, forming a weakened brake or failure.
Therefore, when the vehicle is driving on a wet road, do not press the brake pedal or turn the steering wheel violently.
After leaving the wading area, it is best to slowly step on the brakes of both feet, use the friction of inertia and brakes, and shake the water in the brake disc clean to prevent failure when braking sharply.
6. Brake when following the car
When following the car, you should pay attention to the brakes mainly to maintain a safe distance from the car in front and avoid the occurrence of rear-end collisions, so you should slowly step on the brake pedal when following the car.
In addition to observing the brakes of the car in front, you should also pay attention to the dynamics of the vehicle in front of you, if you find that the car in front has braking behavior, you should put your foot on the brake pedal in advance to prevent the front car from braking sharply.
7. Turning brakes
When braking in the direction, the vehicle is prone to lose its center of gravity, so the speed should be fully reduced by braking before entering the corner.
However, if it is too late to slow down, the brakes can be used briefly according to the situation. If you brake urgently on a slippery bend, you can easily throw your tail, and you can slow down by lowering the gear and using engine brakes.
8, stop do not keep on the brakes
Loosen the brakes once before the vehicle is completely stopped.
If the purpose of our braking is to stop the vehicle from driving, we will have a relatively large impact on the brakes until the vehicle stops driving, and the skill is to release the brakes once before the vehicle is completely stopped, and then tap the brakes until the vehicle stops driving.
9. Red light brake
In fact, this is similar to the general situation, far away to see the traffic light signal in front of the intersection is about to turn from green to red, do not immediately re-press the brakes, you should first loosen the throttle, use the inertia of the car to glide to the intersection (or the front car to maintain a certain distance), when the speed is reduced and then brake the brakes.