For beginners, it is important to understand the speed corresponding to the five gears in the manual gear, otherwise you will often wonder whether it should be asked for now. Let's take a look at the corresponding speed range of manual gears 1 to 5.
Why should the car's gear match the speed? When the speed corresponds to the gear, the car's running performance is at its best, and the thermal efficiency of the fuel oil is the highest. If the speed and gear are not compatible, the phenomenon of high-speed resistance, low speed and high-grade will not only increase fuel consumption, but also bring damage to the engine and transmission, causing irreversible damage to the vehicle, so the car must maintain the gear and speed match during the driving process.
First of all, from the 1st gear, the speed reaches 15 km/h, you can change to 2nd gear; the speed reaches 25 km/h, you can change to 3rd gear; the speed reaches 35 km/h, you can change to 4th gear; the speed reaches 45 km/h, you can change to 5th gear. For details, please refer to the chart.
Shift operation: Press the clutch pedal - quickly release the throttle - hang to the corresponding gear - cooperate with the corresponding throttle according to the gear, or no, quickly raise the clutch pedal to a semi-linkage state - gently release the clutch pedal after clutch anastomosis
Beginners driving in addition to grasping the timing of the gear change as soon as possible, the gesture of shifting is also very skilled, when the five fingers are together, the virtual grasp of the block ball, with the small arm to drive the hand to hang the gear. Pay attention to the strength of the hanging gear to be gentle and slow, do not work too hard, so as not to hang on to other gears, the hanging gear must be stopped in the neutral gear, if the wrong gear is hung, do not be nervous, you can return to the original gear and then change.
Finally, I will use the recipe to summarize the novice learning car trailer:
1. Hang a gear when starting, do not start in the second gear;
2. The gear should be changed step by step, and the gear cannot be jumped;
3, the clutch to the end, the speed is appropriate to change gears;
4, look ahead, can not look at the block.