Home appliance noise, say big is not big, say small is not small, when you want to calm down and do things, these noises will become clear, making you upset.
So, how to make the appliance "lose its temper" and make it calm?
Handling of refrigerator noise
The structure of the refrigerator is relatively complex, and the compressor, condenser and other components are very easy to produce a certain degree of noise when running.
If the noise is beyond the tolerance range, noise reduction can be performed in the following ways:
#1
Adjust the position of items around the refrigerator
A lot of refrigerator noise is caused by machine resonance, you can adjust the horizontal position of the refrigerator, and then fix the inside of the refrigerator and the loose places around it, clean up the debris, and prevent resonance.
#2
Raise the four corners of the refrigerator
Raise the refrigerator by 3 to 6 cm, and adjust the balance of the four corners, so that the air convection space at the bottom of the refrigerator is increased, and the compressor noise and other noise in the lower part come out from the bottom of the box, which can reduce the noise from both sides and the upper part of the refrigerator.
#3
The compressor base should be firmly attached
If the noise is significantly reduced after pressing the compressor by hand, and the noise is increased by lifting the hand, the noise generation can be reduced by adjusting, tightening the bolts of the connection part and replacing the gasket that has lost elasticity.
Handling of washing machine noise
Remove surrounding debris
Common washing machine noise may be caused by foreign objects around the washing machine, too little clothing, uneven placement, and the shipping bolts on the back of the washing machine are not disassembled in time, which can be checked and solved in time.
Adjust the machine balance
The noise that occurs during laundry is mostly caused by the collision between the laundry bucket and the shell, or the uneven ground placed by the washing machine, or the poor contact between the four bottom corners and the ground.
The washer's center of gravity can be adjusted and placed smoothly, or the appropriate pads can be placed on the four foot pads.
Turning the belt makes a "crackling" sound
The failure is caused by a loosening of the rotating belt. During maintenance, the fastening screws of the motor base can be loosened, the motor can be rotated away from the wave shaft, so that the rotating belt is tightened, and then the fastening screws of the machine base can be tightened.
The above methods are some common means of dealing with the noise of home appliances. Simple problems can be handled by yourself, but when encountering complex problems, you still need to ask a professional to overhaul it!