When it comes to spiral tail floating, it is estimated that many people have not been exposed, including Xiaobian when he first heard this name. Will the spiral tail float around in the water? What are its advantages? And how to adjust the fishing drift? Today Xiaobian and everyone together to solve these problems.
<h1 class="pgc-h-arrow-right" data-track="3" > the advantages of spiral tail floating</h1>
1, see the drift more clearly. For anglers with poor vision, they will generally choose to add a thick tail or a flat tail to float to cope. No matter from which angle the spiral tail float, it can also play a visual effect of floating and thickening.
2, drift phase is more sensitive. Compared with the thickened tail, the diameter of the spiral tail is smaller, the weight can be made lighter, the phenomenon of top-heavy can be avoided and the amount of lead eaten can be made smaller, so the sensitivity of the spiral tail floating is relatively high.
3. Easy to adjust and drift. Compared with the flat tail float, the spiral tail float does not need to adjust the position of the float seat, and the visual effect of the drift tail thickening can be achieved by casually inserting it on the float seat, and the flat tail float should adjust the angle of the float to achieve the thickening function.
4. It has certain anti-wind and wave function. Spiral tail floating each eye rotation 360 degrees, the former eye and the latter eye are reciprocal rotation, so that the rotational force generated by the float in the water cancels each other out, with a certain anti-wind and wave and anti-water effect.
<h1 class="pgc-h-arrow-right" data-track="3" > the correct mode of spiral tail floating</h1>
Spiral tail floating and thickened tail and flat tail floating is similar, generally the first few orders for the spiral tail under the normal floating tail design, this design just combines the advantages of thick tail and flat tail floating. It is recommended that you take the following way to adjust the drift.
1. Find half water. The bottom hook hangs heavy lead to find the bottom, and after measuring the water depth, the floating seat will be pulled upwards for a distance (greater than the length of a float), and the drift will be adjusted in this position.
2. Look for a look. In the empty hook state, by repeatedly trimming the lead skin, the float reveals the number of eyes you want. For example, when the floating reveals the four eyes, the eye is four eyes.
3. Find the fishing eye. Double hook on the bait and watch the floating under the pressure of a few eyes. For example, when pressing down the three eyes, continue to shake the float seat upwards, and when the float reveals more than one eye, it means that the bait is in the end. At this time, the number of eyes exposed on the surface of the water is the fishing eye. At this time, it is necessary to pay attention to the change of the drift eye at any time, and the drift is the signal of the fish biting the hook.
<h1 class="pgc-h-arrow-right" data-track="3" > added</h1>
When the spiral tail sinks into the water, it will be a little sluggish due to the influence of water resistance, so friends with higher requirements for agility can choose the two-order spiral tail and adopt the drifting method of the thickened tail to adjust the fishing. If the sensitivity requirements are not harsh (such as recreational wild fishing), the normal vertical floating method can be applied.
I'm a peer, a combat angler who sits by the water's edge all year round and likes to think and share.