Yushu is almost a plant that every family is raising, its price is cheap and simple to maintain, and it can be completely raised indoors, but some flower friends say that the jade tree I raised is not directly allowing it to grow rapidly, so that it has long branches and long leaves, and the long leaves are fat to raise it well? In fact, if you want to raise a good jade tree, growing fast does not mean raising well, the most important thing is to learn to "control", to control it, in order to ensure that our jade tree shape is good-looking, when the time comes to cultivate a big old pile, not only beautiful atmosphere, but also the value can be doubled several times.
The control mentioned here is to control its shape is more beautiful, if you blindly let it grow a branch, it will not grow too many side branches, a long branch will affect the shape of its entire plant, when the branch hangs down is very ugly, there will be a broken situation, so you just need to do the following points.
1, first raise the trunk
Generally we buy seedlings are relatively small, its entire plant is relatively small, the trunk is also very thin, we must first feed its thick trunk, in order to ensure that it is more beautiful in the later stage. How do you raise a backbone? Quite simply, let's first remove some of the bud point leaves at the bottom of the trunk, if you want it to grow to half a meter high, this plant you leave it to about half a meter high, the leaves at the bottom are all knocked off, if you want its trunk to grow to 20 cm high, you keep all the leaves above 20 cm, and the following branches and leaves are all removed, leaving only a thick trunk. In this way, the leaves are removed to retain a trunk, the upper part continues to let it grow, and after a long distance, the top is knocked off, and after the top is removed, he will quickly grow other branches in a position of more than 20 centimeters.
No matter how many branches grow, these branches we all keep to let it grow, grow to a meter long do not need to care about it, unless the branch grows very long and droopy, we then go to prune it, so that after pruning it, the branch will grow side buds, the purpose of this is that as long as the branch grows rapidly, its roots will grow, you can understand how long the branches are long, how long the roots are long, and the roots will grow more capillary roots on this long root, so you should hear this truth clearly. If it is raised in this way, its trunk is due to the root system to absorb nutrients, the top of the branch has been growing, the bottom will gradually become thicker, the trunk will become rapidly aging, if you have raised other plants, other plants have grown, the position at the bottom of the branch will be much thicker than the position of the upper side when it grows to the old, and the aging is more obvious, which is the truth.
2, raise the side branches
When we find that the trunk length is relatively thick, reaching the thickness we want, at this time we have to go to the upper branch of it to completely repair it, shorten the long branch, cut to the length of the crown we want, cut off some of the thin branches in the middle, only a small number of branches are retained, we can understand it as raising secondary branches, these branches are horizontal and vertical to grow, is the main trunk of its entire crown of branches, the remaining thick branches after the shortening of the side buds that grow on it, we continue to let it grow, Do not prune it, let it grow for a period of time, the rest of these pruned branches become thicker, then we go to raise tertiary branches and fourth-level branches, because his secondary branches, tertiary branches, and fourth-level branches have not been pruned to it, it will not grow too many side branches, but these branches will become thicker, and after we prune it is shortened, it is to maintain a thick bottom, so that it can look more like a bonsai.
3, finally lush
If you raise a second-level and third-level branch that looks very good, we can make it long and short, let it grow long and leafy, if you will not raise the shape of the second-level third-level fourth-level branch, you can download a picture, if you want the shape of a big tree, you go to download the shape of the big tree, see how its branches are distributed, and choose to stay on it. After we raise those second-level, third-level, fourth-level branches, we can let it grow new shoots, and after the new shoots grow out, they will retain five to ten centimeters to top it in time, and after the top, it will quickly grow side branches, so that the more side branches there are, the more new leaves, the more leaves are thick, the position above the entire bottom trunk will be leafy, and the whole body will be completely raised, very beautiful.
4. The controller
We raise a jade tree is to raise a good-looking shape, in the whole process as far as possible not to let it grow, if the branches and leaves are long and the spacing is large, then go to raise side buds in the later stage, the side buds are very ugly, so in the whole process of controlling the disciples is very critical, how to control the disciples? It is to give it enough light, if there is a lack of light, its branches will inevitably grow, the leaf spacing will inevitably widen, then it will affect the beauty, the entire maintenance process will be in vain, resulting in our failure to maintain a good bonsai. Therefore, in the process of raising jade trees, we ensure that we see sufficient light, even in summer, we do not need to shade it, as long as there is no shortage of water, it will not sunburn the leaves, it will not be snoring, and the branches that grow vigorously will not grow in vain, and it will be able to raise a good-looking bonsai look, so it is necessary to see more light.
If you like to raise Yushu, want to raise a good-looking bonsai, according to Xiao Qi said to do a good job of these 4 points, learn to control, so that there will be no problems, you can raise a good-looking bonsai look, but remember, we must ensure that the fertilizer is sufficient in the process of raising, it is recommended that you choose a high nitrogen content, other elements are not missing, such as the tenth of the flowers, we can use it once or twice a month, and to ensure that the water is sufficient, do not overly drought, It is recommended that you wait for it to dry more than half of the pot soil to water it in time to ensure the ventilation of the environment, the temperature is not less than ten degrees, it is growing all year round, and soon it will be able to grow a jade tree big old pile.