The LIC480/11 light source emitter features integrated LED technology, a service life of up to 50,000 hours, a compact form factor, and good performance, resulting in a significant reduction in consumption. The use of integrated electronics to ensure the accurate control of light intensity and fault monitoring, widely used in the linear light source emitter device of photoelectric measurement sensors.
Si Cheng Zhao YangYang /Photo
The main role of the LIC480/11 light source emitter is that, when combined with an optical receiver and the corresponding evaluation system, the edges of opaque materials can be scanned in a non-contact manner. A control amplifier, an actuator or a strip-to-edge guiding system are used, and a strip-to-edge guiding system is implemented using a dual-optical receiver.
<h1>Mechanical structure</h1>
Led emitter sources with integrated reflectors are evenly distributed, while mounting via screws of M6×70mm in an aluminum profile frame with glass cover of 50×5mm (W x H). Shield the cable with a 4-pin M12 plug.
After the fluorescent lamp is subjected to a 1000HZ pulse pressure in the LC optoelectronic device, the intensity of the light source is detected in the photovoltaic cell, and then it is controlled in a stable range by an electronic controller. The voltage, temperature change, and lamp aging of the fluorescent lamp do not affect the lighting intensity and measurement data. When the control limit is reached or the normal light source is lost, the monitoring system of the strip position controller immediately locks the controller and sends a fault report. For easy service, fluorescent tubes are mounted on removable parts with transverse guides. And the use of voltage-stabilized industrial plugs to ensure convenient and fast operation. The development of LIH in compressed light source systems further improves the already widely recognized high-frequency source receiving LIH. Unlike the LIH light source, it combines an electronic control system and a light source and applies it to standard industrial fluorescent tubes.
For more EMG light source emitter LIC480/11 related models, please pay attention to Sicheng