Title: Three-way catalyst mold adjustment
In the context of today's increasingly strict environmental protection policies, automobile exhaust emission control has become the focus of attention of enterprises and enterprises. As a key component of automobile exhaust purification, the quality and performance of three-way catalyst are directly related to the effect of emission control. The three-way catalyst mold adjustment technology is the key link to ensure the production of high-quality three-way catalysts. This article will discuss in depth the professional knowledge and practical experience of Juyan Mould Technology in the field of three-way catalyst mold adjustment.
First, the importance of three-way catalyst mold adjustment
1. Improve production efficiency: Through mold adjustment technology, the mold structure can be optimized, the failure rate in the production process can be reduced, and the production efficiency can be improved.
2. Ensure product quality: mold adjustment technology can ensure the stability of the mold in the production process, so as to ensure the consistency and reliability of the three-way catalyst.
3. Reduce production costs: Through mold adjustment technology, the wear and replacement frequency of molds can be reduced, and production costs can be reduced.
Second, the key steps of three-way catalyst mold adjustment
1. Mold inspection: Before adjusting the mold, it is necessary to conduct a comprehensive inspection of the mold to ensure that the mold is not damaged or worn.
2. Setting of mold adjustment parameters: according to the production requirements of the three-way catalyst, set appropriate mold adjustment parameters, such as pressure, temperature, etc.
3. Mold adjustment operation: under the condition of ensuring that the mold and parameters are correct, the mold adjustment operation is carried out to ensure the stability of the mold in the production process.
4. Quality inspection: After the mold adjustment is completed, the quality inspection of the three-way catalyst is required to ensure that it meets the production requirements.