Beginners learn the basics of weaving tutorial here! Here are the methods and techniques of knitting and flake weaving with ring needles

Stick needle according to the type of needle, can be divided into straight needle and ring needle, straight needle usually use at least two, circle weaving needs four, individual types need five needles at the same time, so the straight needle in the ring knitting will continue to change the needle, and the ring needle solves the trouble of frequent needle change, can also avoid the phenomenon of needle gap when the seam position of the straight needle needle is knitted, and when weaving a lot of fabrics, the ring needle with more choices in total length becomes a necessity, and the family has a small baby, Knitting with ring needles can also reduce some of the dangers.

So how should the ring needle be used? Compared with circle weaving, many novice friends are easy to confuse how to use ring needles to piece weaving and ignore the role of intermediate connecting lines, the following figure is the comparison chart of ring knitting and ring weaving, pay attention to the green arrow pointing to the position in the sheet weaving and circle weaving.

For the use of ring needle knitting, in simple terms, it is the same as the straight needle usage "constantly left and right back and forth, alternating between the front and back sides", and the ring needle can be used as a long, soft stick needle in the middle.

The following figure is an example of knitting with ring needles, and then deepen the use of newbie friends for ring knitting and ring needles.

For the ring needle ring knitting, such as ring knitting sleeves with ring needles is somewhat inconvenient, but the use of straight needles is very troublesome, the gap at the seam is also a problem, so the weaving life weaver "heavenly clouds" shared such a small skill:

Knitting sleeves with rings, I found that it was very difficult, because the number of needles on the sleeves was small, it was not good to string needles, it was troublesome and a waste of time. After thinking about it, I summarized a little tip that can be quickly stringed needles, which is both simple and time-saving, and sent to share with my sisters. Divide the sleeve on the ring needle into two parts, first wear the left side of the thread sleeve to the left hand needle, and weave it with the right hand needle. Note: When knitting the right hand needle, do not over-draw, leave a part of the wire of the ring needle, which is the focus, and then put the left hand needle on the needle sleeve and continue to weave. After weaving, pay attention to leaving the wire. But to use a longer ring needle, I used 80 cm, short one has not tried. It feels good, and the speed is a lot faster~

In general, the sleeve on the ring needle is always divided into two parts, and no matter which part is woven, it is necessary to ensure that the steel wire part left behind cannot be combined