laitimes

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

author:What is worth buying

This content comes from @What's worth buyingAPP, and the views only represent the author's own |Author: Wind Freedom

1. I sawed the lure rod short

I knew that Sanyuan (the founder of Kitakigawa) wanted a very special rod, a rod based on the design of Japanese cave fishing. 、

The hole rod is designed with an extremely exaggerated taper ratio because it needs to be pulled out of the structure and has a good feel.

But there is a big problem with this kind of pole, it is used as fresh water, especially when it is controlled with one hand, and the tail handle of the pole is too long, which gave me the idea of buying it myself and sawing it short.

The previous black mark 6011 is a short-sized pole, which feels very comfortable to use, so it looks like a replica.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

In addition, the reason why I am interested in the products of the ternary design is mainly because I initially started the fishing rod of Mingta, which feels very good, and it is also recommended to the chief life home who is worth buying, and the evaluation is also good.

Second, sawing and correction process

2.1 Basic Appearance

The rod is a newly released whale horn in Sanyuan, and the name seems to have some origin, so I don't have much interest in paying attention.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Looking at the precursor of the pole, 1.7mm is not thick as a pole of M strength.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The front element of the wheel seat of the pole reached 16mm

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The Yuan meridian at the bottom of the pole reaches 21.4mm, the first meridian is 1.7mm, the Yuan meridian is 21.4mm, and the pole is 1.98 meters long, which is a terrible taper ratio

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The overall weight of the rod is 103 grams, and this gram weight needs to be remembered, because the back cutting and the installation of tail plugs require this gram weight for reference

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

This wheel seat belongs to the rock fishing wheel seat, so I think the durability is average, but the advantage is that the hand is basically attached to the rod wall, and the sensitivity is good.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

2.2 Sawing operations

It's easy to see short, this is not difficult, I saw more than 10 yuan, it feels good, the mahogany stick behind me is also bought from the Internet, 30cm2.2, the vacuum cleaner is because it is more convenient to clean the desktop.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The size I sawed off was basically the back of the whale horns.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Fishing rods such as saw blade saws are still easy and the fracture is intact, and there is no decarburization (don't see too fast, take your time)

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

A total of 18 centimeters were sawn off.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The original tail plug needs to be simply repaired, after all, part of it is sawn off, so the round warp has also changed.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Install the plug and fix it with 502 (but it is not recommended to use this tail plug, because it will be heavy and there will be a heavy head later.)

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Compared to the previous weight, after removing 18 cm, the weight of the pole became 88 grams (the original gram weight was 103 grams)

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

2.3 Equilibrium point after sawing (1st edition)

Comes with 200g wheels

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Equipped with a 200g wheel with a center of gravity.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Comes with 230g wheels

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The center of gravity has been shifted back by one finger.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

It should be noted here that this is the first version

2.4 Balance point correction after sawing

I bought a mahogany stick from the Internet, and I didn't expect that the 30cm mahogany stick was so heavy

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

A section was sawn out, which was 22 grams, and it was planned to remove the skin at 15 grams, but the actual visible back was different from what was expected.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

This is to use a rub to optimize the insertion opening, and the wood chips removed can be seen here to see the importance of the vacuum cleaner.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The final weight of the pole was 105 grams, and I tested it several times, ignoring that the guide ring in the photo seemed to touch the table

I'm a little worried about my handiwork, and I got some 502 to get all over the rod

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

The length of the removal can be judged according to the word "horn", if you want to lose weight of this pole, buy a smaller size when buying mahogany.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

After the correction, the same wheel was extended back by two fingers, and I was very satisfied with this important point.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

2.5 Overall appearance of the pole

Except that the glue is not perfect, I personally think it's pretty good

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

With Ix, the bright colors echo each other well

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

This livery on the body of the rod is sure to be liked by those who like it anyway, but I personally don't like it very much.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

This pole will be used more in the back, with heavy PE wheels, to play with strong and fine obstacles.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

2. 6 All products involved in the test

I bought this saw, and it's no problem sawing wood or something.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Delixi small hand saw, hacksaw, saw, saw, iron, household metal, hand cutting, woodworking saw, hand-saw, wood special

I can't find the link to that vacuum cleaner, you can take a look at this Baseus, I have used the suction power with the same volume.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Baseus car vacuum cleaner with high suction power small car wireless super suction charging handheld car household special machine

3. Do a fishing test

This is just sawed and can't wait to take it to use, but there are some problems, and the sense of heaviness is obvious, so there is a mahogany tail plug correction at the back.

This is that after replacing the new tail plug, the weight of the rod rises to 100 grams, and the sense of heaviness disappears, and it can be matched with lighter wheels, such as removing the double rocker arm in the video and replacing it with a single wisharm.

Fourth, purchase suggestions

Note: For the use of fresh water, the recreational properties of this pole itself are greater than the significance of practical application, so it is selected according to the use.

1. According to the current state of the finished product, the rod is more suitable for reverse fishing, more suitable for playing strong and fine, and when there is time to go to boat fishing later, try the No. 2 PE branch structure, etc., it should be able to have a good performance.

2. The biggest shortcoming of the pole comes from the wheel seat, the strength of this wheel feels a little weak, and I don't know if I can resist the toss.

3. The sensitivity of the rod is completely in line with expectations, or even exceeds expectations, after all, the material and taper are here.

4. After all, the strength of the pole is m, and the design is super fast, so the waist strength is not bad.

5、The painting of the pole depends entirely on personal preference.,Some people think it's very handsome.,After all, Sand Lake.、Cardiff monsters are rainbow paints.,Anyway, I personally don't think.,I hope it's a plain rod embryo.。

One last word, not for newbies, not for newbies, not for newbies.

The value of this pole lies in tossing and playing, if it is purely used as a tool, it is not as reliable as buying Master Genzo, and the pole positioning is more like a toy, satisfying their own idea of tossing.

Can you believe it, I sawed the lure rod short, DIY the lure rod that belongs to my own comfortable feel

Whale horn lure rod large taper perch rod root hole rod

5. The following rods and wheels were bought in 23 years, and most of them have not been sent after the test, so if you are interested in knowing, you can ask directly.

佐大师167M-S 一本半枪柄竿

禧玛诺卡迪夫NX S60UL 直柄两节

禧玛诺卡迪夫怪物S77L 直柄两节

Up to 100 million watts Black Standard 682MHST handle two sections

Continental dragon trout micro object horsemouth rod straight handle two sections

达瓦EXIST纺车轮 2500S 轻量化旗舰纺车轮

ABU rove 纺车轮 3000S 强烈泛用纺车轮

ABU zenon 纺车轮 2500S 超轻量化纺车轮

In the article of General Road Asia, all questions must be answered, welcome to communicate

Read on