Text/Home Miscellaneous Altar
When decorating, most families may still install a top spray + hand shower in the shower room.
However, you will find a phenomenon that many families do not use it several times even if they install a top spray in the shower room.
In fact, for the top spray of the shower, due to the characteristics of its own water, it has been abandoned by many friends.
Many of you may not know the specific reason. If you figure out why, you won't be surprised.
It's no wonder that more and more people don't pretend to spray top, and come over and say: these 5 shortcomings are really uncomfortable.
(1) There is nowhere to hide the cold water released by the —— ——
The first problem caused by the overhead spray installed in the shower room is to release cold water, so that you have nowhere to hide.
Because for most of our friends, when taking a shower, there is a habit of entering the shower room and then turning on the shower.
However, if we use the top spray, you will find that when the top spray is turned on, the first thing that comes out is cool water. This cool water will spray you all over your body, leaving you with nowhere to hide.
If it's summer, it may not feel very noticeable.
However, if it is a cold winter, if you spray a body of cold water, what does it feel like?
Netizen @Love clean people
With a top spray, how to take a bath in winter? Spray me with cold water every time. This top spray is really hard to use. I advise everyone not to pretend, directly use the hand-held shower, install the top spray, and it is easy to use the wrong one.
Therefore, because the top spray is sprayed from the top down, the area of the water spray is relatively large, and the cold water that comes out at the beginning will lead to a very poor use experience.
(1) Put water first and then enter. That is, outside the bath room, first turn on the top spray and let the water for a while. Wait until the hot water comes out, then go into the shower room. With a top spray, it's good to form this habit.
(2) Install a constant temperature shower. Of course, make sure that the water pressure in your home meets the requirements. That way, we don't have to worry about getting the wrong mode and getting cold water sprayed.
(2) The water pressure of the —— —— is insufficient, and the water flow is very small
The overhead spray in the shower room is also affected by water pressure. When the water pressure is insufficient, the water flow is small.
In fact, this point is related to the installation method of the top spray and the internal structure of the top spray.
Because we install overhead spray in the shower room, we usually bury the hot and cold water pipes in the wall.
After that, we connected it to the shower with a water pipe buried in the wall.
However, the top spray is due to the fact that it is spraying water on the top. Therefore, the installation height is very high, generally reaching about two meters.
In addition, the water spray area of the top spray is relatively large, so in fact, the interior is equivalent to a pressure-relieving structure.
Although the top spray uses the nozzle hole for pressurization at the end, it creates a different effect of water spray.
However, if the water pressure at home is low, you will find that the top spray is really difficult to use.
The water flow is very small and the water pressure is insufficient, so even if the top spray can spray water, the water flow is very small, and the hair is not washed clean for half a day.
There is also a situation that some holes come out of the top spray, and some holes do not produce water. In fact, this is also caused by insufficient water pressure.
Netizen @sky
Does the top spray affect the water pressure? I use it handheld and feel that the water flow is okay. Why is it that as soon as you open the top spray, it almost becomes a drizzle. Is there any way to remedy this situation?
Therefore, the top spray has high requirements for water pressure, if the water pressure is small, do not install the top spray.
(1) Before installing the top spray, it is recommended to measure the water pressure at home. If the water pressure in the shower can reach 2~3 kg, then the top spray can be installed; If it is less than 2 kg, it is recommended not to install a top spray.
(2) After installing the top spray, you can open the top spray to try the effect. If you feel obvious pressure, then it means that it is okay. Otherwise, it's hard to use.
(3) The —— —— water pressure is high and the water flow is too large
If the water pressure is particularly large, you will find that the water flow is very large, and it feels very uncomfortable to hit the body.
Although the current shower head or top configuration, there are different modes that can achieve different water spray effects.
However, there is a premise for these models, that is, the water pressure is in accordance with the requirements.
If the water pressure at home is particularly sufficient, you will find that it is very uncomfortable to use a top spray.
No matter how you adjust the top spray, the top spray water hits the head and face, and it hurts. Even when tuned to the softest mode, it still feels this way.
The amount of water is too large and it is very uncomfortable for people to take a bath. Because of the high water pressure, the water spraying effect is good, and the water flow rate is relatively large. At this time, if you take a bath, it is actually very uncomfortable.
Netizen @ Weilan
The water pressure is enough, and it is not a good feeling. I don't even dare to use the top spray in my shower room now. As soon as I turned on the top spray, the water sprayed directly on the head and hit the face, which was really uncomfortable. I wonder if there is a way to adjust it?
Therefore, the top spray has high requirements for water pressure, and it is not easy to use low water pressure, and it is also not easy to use if the water pressure is too high.
(1) Use a large hand-held shower to replace the top spray. This way, you will find that you will not be spraying your face so much.
(2) Use a hand-held shower and place it on the wall instead of the top spray. This way we can stay away from the hand shower and the pressure is not so great.
(4) The —— —— is easy to block, and it is not easy to clear
The top spray in the shower room is used by many friends, because the top spray is particularly easy to block, and it is not easy to clear.
In fact, I believe that many friends have a deep understanding of this.
For example, we have a newly installed shower at home, and when we first use it, the water is relatively even.
However, it doesn't take long for you to find that the water coming out of the top spray has a large flow and a small flow.
After a while, there will be water coming out of some holes in the top spray, and some holes not coming out of water.
The reason for these situations is basically that there is limescale inside the top spray, which blocks the water outlet hole.
Because the top spray sprays water from top to bottom, the scale inside is easy to block the water outlet hole along the water, resulting in more and more serious scale.
After the top spray is scaled, it is difficult for many friends to clean it because it is in the upper part. Unless it is removed, the scale inside will not be removed at all.
Therefore, scale may appear after a period of time for top spraying, and many friends give up not using it, because the scale inside is really difficult to clean.
Netizen @小草
Why is it so easy to scale my top spray? It has only been installed for less than two months, and I found that there are a lot of yellow or white particles in it, are they all scale? Can this limescale be cleaned by itself? Why can't I get it down?
(1) For the shower in the shower room, it is actually recommended that you consider those that do not need to be cleaned. That is, it is not easy to form scale, and such a shower will take a longer time.
(2) If the top spray has scale, if it can be removed, it is recommended to remove it. Then, soak it in white vinegar, rinse it with water, and put it on again.
(5) —— —— spraying water on the top of the head, making it uncomfortable to breathe
Another very important reason why more and more people do not use overhead sprays is that overhead sprays make people uncomfortable to breathe.
I don't know if you feel this way, but my feelings are very deep anyway.
The top spray is the overall downward spray from the top of the head, bathing the person completely under the top spray water.
At this time, you will find that if the water coming out of the top is not large, it may not have much effect on breathing.
However, if the water output of the top spray is large, you will find it difficult to breathe.
In fact, it is indeed normal for this situation to occur. Because standing in hot water, coupled with the hot steam in the shower room, can really make people breathless.
Netizen @River
The top spray is really not easy to use! Every time I take a shower with a top spray, I feel panicked and can't breathe. I've now given up on the top spray altogether and just used my hands. Have you ever felt this way?
Therefore, for some friends, the feeling of top spray is indeed bad. If you stand under the top spray and take a bath, you will feel that your breathing is not smooth.
(1) For friends with a bad heart or high blood pressure, I personally recommend that you do not use top spray. When showering, use your handheld is fine.
(2) When taking a shower, do not put the toilet pipe very strictly, and try to keep ventilation. In this way, you can have enough oxygen, and you won't feel too stuffy.
Written at the end of the article
The top spray in the shower room is indeed used less and less. Therefore, when decorating, don't install it if you can.
In this issue, I will share with you some of the shortcomings of shower roof spray. This is the end of sharing, welcome to leave a comment in the comment area, remember to click to follow! #头条创作挑战赛#
[The text is original, the picture comes from the Internet, and the infringement contact will be deleted]