With the iteration of the home decoration industry and the continuous updating of people's aesthetics, the current decoration is not only the pursuit of function, but also the appearance of beauty. The home decoration is beautiful and easy to use, as if people are wearing the right clothes, decent and comfortable.
However, if we do not understand the decoration process and key points in advance when decorating, it is easy to step on the pit and overturn if we are not careful. Also, now many Internet celebrities decorate from the picture to look amazing, but the actual decoration has become a fright.
Today, Xiao Ai will tell you about the 4 places that are most afraid of overturning in decoration, and I hope you will not step on the pit again when decorating.
1. The built-in refrigerator is too thick and protrudes from the cabinet plane
Nowadays, most families prefer to make customized integrated cabinets, which can be embedded in refrigerators, ovens, etc. It looks not only beautiful and generous, but also saves space and is not messy.
However, the place where the car often overturns is also the built-in cabinet, especially many people want to make built-in refrigerators, but when they install it, they find that the refrigerator is too thick, not only protruding from the cabinet plane, but also difficult to open the refrigerator door.
It is recommended to avoid rollovers
Generally, cabinets are 60cm thick, so be sure to buy a built-in refrigerator with less than this thickness, and leave a certain amount of space for heat dissipation.
Of course, you can also directly buy an ultra-thin zero-embedded refrigerator with front heat dissipation. In this way, it is easy to be flush with the cabinet, and the cabinet has a high fit without gaps, and there are no hygienic dead corners.
2. The custom wardrobe is not planned in a good space, and it looks big and small
Although we have emphasized many times before the practicality and aesthetics of a custom wardrobe. However, when we renovated, it was still easy to overturn and did not plan the internal space well.
For example, there must be a hanging area, a folding area, as well as drawers and lattice spaces. In this way, our wardrobe can be sorted and put to good use from high to low.
Otherwise, we spend money on a custom wardrobe, but it is only beautiful on the surface, and it is not practical to use at all.
It is recommended to avoid rollovers
After deciding to make a custom wardrobe, it is necessary to communicate with the wood designer about their needs, the population and living habits. Meticulous division of the wardrobe interior.
For example, where to install the drawer, leave a few lattices, and even some owners want to put the garment steamer into the wardrobe, then it is even more necessary to leave a place and set aside the socket in advance.
3. The arc and height of the arched door are wrong, and there is no elegance but embarrassment
In recent years, many people have adopted arched door designs when decorating, especially French style or medieval style, etc., and the appearance rate of arched doors is very high.
However, when we tried to make an arched door only to find that it overturned, the elegance we thought was turned into embarrassment. The main problem lies in the curvature and height of the arched doors.
It is recommended to avoid rollovers
1. If you want to make an arched door, you must ensure that the height is higher than that of other doors, at least it must be flush with other doors, otherwise it will not be an arched door, but a "warehouse door", which is a huge embarrassment.
2, do the arch door to determine the radian, generally there are flat arch, round arch, pointed arch and half arch, etc., if it is a round arch, the arch of the arc must be a semicircle, once the proportion is out of balance, it will overturn.
4. The height of the wall-hung toilet is wrong, and the feet and legs are suspended
In the hardest-hit areas of overturning, there are also wall-hung toilets installed in bathrooms, which have become popular in recent years. Mainly because it looks good and neat, and it is easy to clean up when it hangs in the air, leaving no sanitary dead corners.
However, the most terrible thing is that the height is not adjusted well, it is not tailored according to the height of the owner, and the legs and feet are not flat when you sit on it......
In addition, there is another problem, that is, forgetting to leave a maintenance opening, once there is a problem, the maintenance cost is too high.
It is recommended to avoid rollovers
When choosing a wall-hung toilet, be sure to measure the height of the embedded parts in advance. It is recommended to determine according to the height of the permanent owner, and of course you can also refer to two height values.
One is that the toilet should be installed flush with the height of the calf, and the other is that the bottom should leave 10cm of space from the ground.
It also depends on the ground treatment of your own bathroom, and then pushes the installation height of the water tank bracket backwards.
Little Love Tips:
This kind of wall-hung toilet is also considered a built-in installation, so it must be left with an access opening, and it is easy to repair and repair once there is a problem.