laitimes

Important reminder! Subject 3: The 7 most error-prone places!

author:Spotted Path
Important reminder! Subject 3: The 7 most error-prone places!

The subject 3 exam pays great attention to details, and many people fail the exam not because it is difficult to master this place, but because they are overly nervous.

When taking the subject 3 exam, you must pay special attention to these 9 details that are most likely to make mistakes

Important reminder! Subject 3: The 7 most error-prone places!

First, you forgot to wear your seatbelt when you started

Remember a mantra to get started: one series, two tones, three checks

Wear seat belts, adjust the seat and mirrors, check the light reset, whether the handbrake is up, whether the gear is correct, and check that the door is closed

Second, simulate the operation of lights at night

Simulated lighting operation at night, except for some can't remember or misremember the light, it is easy to operate too fast or too slow, resulting in failure. Especially when the lights alternate between near and far, it is necessary to confirm that the alternation is in place.

Third, you forgot to let go of the handbrake when you started

When you let go of the handbrake, make sure that the handbrake has been put down to the end. You can observe whether the P indicator on the instrument panel disappears

Important reminder! Subject 3: The 7 most error-prone places!

Fourth, forget to steer

In the test items, the corresponding lights need to be turned on for starting, pulling over, changing lanes, overtaking, turning, and making a U-turn. Many students may forget to turn the steer in advance, resulting in less than 3 seconds to remember.

Fifth, forget to tilt your head from side to side to observe

This is a manual judgment situation, if you forget to swing your head left and right to observe that there is a special situation, you may be stepped on the brakes by the safety officer and cause failure, so this detail is very important.

Sixth, drive in a straight line

Keeping it straight is key – the vehicle is straight. That is, before entering the straight driving area, it is necessary to ensure that the body of the vehicle is parallel to the lane line, and at the same time, the steering wheel should be fine-tuned during the driving process to ensure that the car does not go crooked.

Important reminder! Subject 3: The 7 most error-prone places!

Seventh, the gear does not match the speed

It is to keep in mind a mantra: every 5 plus gear, every 0 down gear. For details, you can take a look at this gear matching reference table

Important reminder! Subject 3: The 7 most error-prone places!

Read on