It takes time to learn any craft or technology, even if it takes a few months to repair the printer, and it is only a beginner.
First of all, I oppose the uselessness of learning technology, I am a printer repairer, although not as good as a certain industry boss, but I also bought two houses, and now I am still doing self-media, I am the most influential printer blogger in Zhihu.
Back to the subject's question, he has already mixed into the factory to make screws, and he is obviously in a hurry to use the money.
Don't say that learning craftsmanship is a long-term investment, you can go to the factory to make screws, how can there be a sense of investment?
Not to mention long-term planning, people's thinking is very simple, and they are about to make money, and it is obvious that learning the craft will not work. But screwing can indeed make money immediately, especially for ordinary workers, as long as they are willing to endure hardships, five or six thousand a month is not a big problem.
During the apprenticeship, the salary is very low and you will be scolded by the master, all kinds of people's faces, all kinds of PUA you, how many people can stand it?
Also, is it guaranteed that you will find a job that pays well?
You say you're going it alone? Will you be in business? Where do customers come from? How to drain traffic? How to monetize?
However, if you go directly to the factory to make screws, you don't need to think about these, and you can make money by working in the factory.
Even if it is a maintenance kind of manual work, you need to use your brain, you have to use your hands and brains, and you have to be careful and calm and not panic.
The nature of the work of screwing in the factory is actually similar to that of the merchants in the computer city. In the early years, online shopping was underdeveloped, and practitioners in the computer city could make money as long as they could assemble computers.
In the long run, they think that they can make money without craftsmanship, and they can always make money, let alone that they will be replaced by e-commerce.
To learn the craft, you have to use your brain, all kinds of disassembly is very troublesome, and you have to take risks if you don't do it well.
But there is no need to sell computers, and in the early years, the merchants in the computer city who were underdeveloped in online shopping encountered Xiaobai and flickered a quasi.
At every turn, there are hundreds or thousands of profits, who still wants to learn the craft?
Later, with the development of online shopping, they couldn't make money, and even survival was a problem.
I began to cramming temporarily, attaching importance to after-sales but found that I couldn't, I would only install the system to assemble the computer, engage in this kind of repetitive manual labor, and the slightly more complicated problem could not be solved.
The problem with the computer is to install the system, and the problem with the printer is to change the toner cartridge, and they will not do anything other than this.
This phenomenon is actually the same as those mentioned by the subject who would rather go to the factory to make screws than learn the craft. In essence, they are accustomed to making money without using their brains, and their thinking has become rigid and lacks vitality.
In addition, I am old and have no ability to learn, and they also sell printers but they won't repair them if they are broken, so they all come to me.
When I cooperated with a computer city merchant, the boss asked me to teach them to repair the printer, I said you first learn the principle and structure of the printer, repair things to pay attention to ideas, not toss as soon as you come up.
The boss said, don't say what the principle is not the principle, you just tell me what to change, I said that you sell too many printer models, different types of printers have different principles and structures, and the specific situation should be analyzed on a case-by-case basis.
However, he didn't listen to me and didn't want to learn at all, and I didn't bother to teach, and now they have switched to selling rice noodles.
Maintenance is to treat the equipment, and it is impossible to make effective judgments without understanding the structure and principle.
They don't even know the slightest common sense, and they can't tell the difference between "laser printer" and "inkjet printer", or even "toner cartridge" and "toner cartridge".
People who have been engaged in repetitive work for a long time have rarely used their brains, and have long been accustomed to the model that only manual labor is needed to earn money.
It is already difficult to do some fine work or handicraft work, and the thinking has been solidified and there is no habit of thinking.
They don't even want to understand the structural principle of the equipment, they want to know immediately what is broken, which is simply impossible, and the problem is judged to require experience and knowledge accumulation.
Therefore, it is best to learn the craft as soon as possible, it is best to learn it before you get married, at this time you don't need to support your family and don't need to consider the pension of your parents, you can learn art with peace of mind.
Don't go to the factory to play screws at a young age, engage in this kind of repetitive manual labor, usually the circle is small and there are no connections, and there is no craftsmanship can only work hard, and finally the age will not do anything, can only play screws for a lifetime.