The installation tips for pedestrian access gates-speed gates are as follows:
Preparation before installation: Determine the installation location, clean the ground to ensure that it is flat and clean, check whether there is a reliable power supply nearby, and prepare the tools and materials required during the installation process, such as screwdrivers, electric drills, fixing screws, etc.
Install the base of the turnstile: Place the base on the ground, adjust it to a suitable position and angle, and use screws to fix the base on the ground to ensure that the base is stable and reliable. Connect power cords and other cables as needed to ensure a secure and reliable connection.
Install the main body of the turnstile: Place the main body of the turnstile on the base, adjust it to a suitable position and angle, and use screws to fix the main body of the turnstile on the base to ensure that the main body is stable and reliable. Then connect the power cord and other cables to make sure the connection is secure and reliable.
Wiring processing: The specific wiring of power cables, network cables, and online cables should be reasonable and neat, and the cables should be kept horizontal or vertical, and protected and fixed with casing. The communication cable and power plug should be done well in accordance with the wiring regulations of the device plan, and the underground wiring should be tight to avoid the cable being eroded.
Commissioning and inspection: power-on debugging speed gates, including the commissioning of swing gates, wing gates, and flat wing doors, to ensure that the swing doors are parallel, and the wing gate wing switch position is correct. After completing the installation, check all roads for system vulnerabilities, whether the turnstile is fixed and stable, and conduct a power-on test to ensure that it can work properly.
Please note that there may be differences in the installation process of different models and brands of pedestrian access gates-speed gates, so it is recommended to refer to the specific installation instructions or consult professional technicians for installation during actual installation. At the same time, ensure that the installation process complies with relevant standards and regulations to ensure the safety and stability of the equipment.