Some injection molded parts will have a clamping line, and the thickness of the clamping line is about 1mm, if you want to remove it without stinging your hands, what processing method can be used to meet the requirements? Now many processing tools are installed in the robot three to remove, so it is more suitable to be equipped with a 60,000-rpm RBZ floating spindle.
The injection molded parts are softer than the metal parts, so the torque of the RBZ floating spindle used can not be large, the diameter of 30mm can be used, the speed is up to 60,000 rpm, the speed is adjustable, and the float can realize radial 360° radial floating, 5mm axial floating, which can be removed along the trajectory of the clamping line, and the buoyancy force is uniform and the grinding is uniform.
The floating force of the RBZ floating spindle is adjustable, which can be adjusted according to the thickness of the burr, and it is lightweight, which is very suitable for installation on light robots and saves costs. Of course, there are also high-torque spindles to choose from to meet machining needs.