Preface
After the USB-C interface of the iPhone15 series was upgraded, the interface of the mobile phone market has been basically unified. Now you can solve the charging problem of Apple and Android mobile phones, tablets and most thin and light notebooks under one C-C data. However, thanks to Apple's excellent system maintenance and updates, there are still many users who are still using the iPhone 14 series and previous models, so the Lightning connector has not been eliminated at present.
However, according to the current data and analysis of market trends, Apple may gradually reduce or even stop launching devices equipped with Lightning connector in the future. In addition, Apple already offers a USB-C port on every Mac and almost every iPad it sells, and even uses USB-C for Studio Display, Pro Display XDR, some Beats headphones, and some other accessories, so you can use a USB-C to Lightning adapter if you want to seamlessly integrate with the iPhone 14 series and previous models without the cable mess caused by multiple cables.
Yangwei precision USB-C to Lightning fast charging converter
The charging head network got a USB-C to Lightning converter developed by Yangwei Precision, this solution is extremely compact, and it can be converted into a C-L cable without feeling when connected to a cable with a C head.
From left to right, the USB-C receptacle, the finished USB-C to Lightning converter, and the attached retainer housing. This USB-C receptacle developed by Yangwei Precision is very different from the common products on the market. In terms of function, thanks to its special structural design, it does not need cables and adapter boards, nor does it need to make structural changes to the Lightning head, and it can be directly soldered with the Apple C94 Lightning head to achieve USB PD fast charging function and save costs. It is also of great help to reduce the size of the product and enhance the portability of the product.
It is not difficult to see from the above figure that Yangwei Precision's USB-C female socket is equipped with five welding pins at the end, and they are all widened design, which can correspond to the welding pins on the PCB board of Apple's Lightning head, with high soldering yield and reduced the manufacturing difficulty of the product. The housing in the upper right corner increases the stability of the connection and protects the PCB of the Apple Lightning head from outside interference.
In addition, there is an injection molding slot on each side of the tail, which provides precise positioning of the Lightning PCB during the soldering process. Combined with the stable housing, the connection stability and stability of the converter can be significantly improved, and this structural design has obtained national patents.
The terminals in the USB-C female socket developed by Yangwei Precision are made of C18400 ultra-high conductivity copper, the tongue adopts the structure of the middle clip, and the number of insertion and unplugging can reach more than 10,000 times, and the front end of the tongue does not expose copper, so as to avoid the situation that the product is short-circuited in the process of long-term plugging and unplugging, and ensure that the product has a long enough service life.
Back to the product, the left side is the USB-C female connector, and the right side is the Lightning interface, through which the USB-C cable can be used to charge the iPhone 14 and below series. At the same time, the solution supports PD3.1 and Apple DCP protocols, and the Lightning interface supports a maximum charging power of about 29W, which is compatible with various types of A-C and C-C cables, and can realize fast charging and data synchronization at any time.
The length of the solution is measured to be about 22.79mm, the product size is short and exquisite, suitable for carrying around, and widely compatible with various brands of adapters.
The actual finished product presented by this solution is very delicate and compact. At present, Apple has set clear specifications for C to Lightning products, and the solution launched by Yangwei Precision is more competitive in this context, not only compact, but also powerful and cost-effective, which has a unique advantage in its class.
Summary of the charging head network
The USB-C female socket developed by Yangwei Precision is different from the products on the market, with a special structural design, no adapter board, and can be directly soldered to the Apple C94 Lightning head to achieve USB PD fast charging function, the product size is small and portable, using high conductivity copper material, the number of plugging and unplugging can reach more than 10,000 times, and there is no problem with long-term stable use. The converter supports PD and Apple DCP protocols, is compatible with various types of USB-C cables, and has a maximum charging power of about 29W, which can achieve fast charging and data synchronization. The length of the product is about 22.79mm, which is suitable for carrying around and sparing, and is widely compatible with various brands of adapters.
Yangwei PrecisionMore product introduction.
If you have USB-C receptacles and other product needs, you can contact Yangwei Precision directly.