Don't think that everything will be fine after the house decoration is completed, the follow-up acceptance link is the key moment for you to really sober up. It may reveal some unexpected issues and leave you at risk of reinstalling, wasting a lot of money and time. Therefore, we must strictly control every aspect of the house decoration to make the acceptance process more smooth and enjoyable.
1. Pay special attention to the thickness of the cabinet body
It is recommended to choose a 18mm thick panel as the cabinet material, which has a much longer service life than a 16mm panel and is quite cost-effective, making it an ideal choice for creating a durable cabinet.
2. Check the relative height of the custom cabinet
When inspecting the base cabinet in the worktop or stainless steel sink area, reach in and measure the height of your elbow from the countertop, making sure it is 10-15 cm. At the same time, please note that the base cabinet in the natural gas stove area should be 10 cm lower than the actual operation area to ensure comfort and safety in use.
3. Observe the laying condition of the wooden floor
If you walk on the floor multiple times, if the floor is warped, damaged, or creaks, it is likely that there is an unevenness in the floor on which the floor is laid. In short, the flatness deviation of the floor may have exceeded 5mm and requires further inspection and treatment.
Fourth, pay attention to the gap between the floor and the wall
In order to ensure that the floor can expand and contract freely in summer, and avoid damage to the wall floor due to telescopic cracking, it is necessary to reserve a gap of 8-12mm. This detail is essential for the longevity of the floor.
5. Check whether the wardrobe sliding door can be closed tightly
It is not recommended to use sliding doors, because they cannot effectively prevent the entry of external dust, especially the inside of the ground rail is easy to accumulate floating dust, which becomes a cleaning problem and brings great inconvenience to sanitation maintenance.
6. Check the design of the roof of the wardrobe
The wardrobe design should stand up to the sky to ensure seamless connection with the ceiling, completely eliminate dust accumulation and sanitary dead corners, make space utilization more efficient, and cleaning and maintenance more convenient.
7. Carefully inspect the installation of wooden doors
Carefully inspect the door for bruises, hammer marks, burrs, or insects. It is important to ensure that the paint on the door leaf and the top of the door is evenly applied and that there is no leakage to ensure the aesthetics and durability of the door.
8. Manually switch all doors under the power switch
Please carefully check the wooden door for looseness or affect the power switch. After closing the wooden door, it should be ensured that the door leaf does not have undesirable phenomena such as inverted warping and rebound, so as to ensure smooth and safe use.
9. Check the power socket
If you plan to use a bit plug, be sure to make sure that the internal wiring is correct, that is, the left side is the neutral wire, and the right side is the live wire. If the wiring is reversed, it may cause circuit failure or even tripping, so it is important to handle it with caution.
10. Pay special attention to the sockets in the toilets
To ensure the safety of the power supply, a splash box must be installed to protect against the risk of short circuits caused by daily water splashing on the power supply. This protective measure is essential for the electrical safety of the home and must be taken seriously.
11. Try out the power switches
Please inspect electrical equipment, including air leakage switches, to ensure their effectiveness and flexibility. Special attention should be paid to key areas such as the entrance door, living room, toilet door, bedroom door and bedside, and double-open and dual-control switches need to be installed to facilitate the convenience and safety of daily life.
Private message editor, send the electronic version of the carefully arranged "99 Pit Avoidance Preparations Before Decoration", when it is on sale Image source network: infringement contact deletion