CAD how to draw an arc, Xiaobian teaches you to draw an arc easily, many users want to use CAD to draw an arc, but do not know the specific operation method, today Xiaobian brings you the easy operation of CAD arc drawing, users in need should not miss it.
Method 1: Fengyun CAD Editor
Install and open the Fengyun CAD editor, then load the drawing file you want to edit, enter "PLINE" in the command line and press enter, or directly find the "Multi-Ended String" tool button on the toolbar and click to open the Polyline Drawing Tool, at the command line prompt, type "A" and press Enter to start the arc mode of polyline.
Enter "C" and press enter, indicating that you want to draw an arc, enter the coordinates of the start of the arc in the command line and press enter, then enter the radius of the arc and press enter, and finally, enter the end coordinates of the arc and press enter. It should be noted that the start and end points of the arc must be within the radius of the arc, and the arc will be automatically drawn on the drawing after confirming that it is correct.
Alternatively, you can use other CAD software such as AutoCAD, which usually provides similar arc drawing capabilities and has similar steps. No matter which software you choose, familiarity with its commands and tools is key to drawing precise arcs.
Method 2: AutoCAD
AutoCAD can easily draw arc lines, and there are many different ways, today Xiaobian will list a three-point way for you: draw an arc by directly specifying three points, the first point and the third point as the starting point and end point of the arc respectively.
Overall, AutoCAD provides a variety of flexible ways to draw arcs, and users can choose the most appropriate method according to their specific design and drawing needs.
Method 3: Oasis CAD
Install and open the Oasis CAD software, find the "Polyline" function in the toolbar, or enter "pline" in the command line to quickly invoke the function, set a starting point to start drawing multiple line segments, and during the drawing process, select the "Arc" command, and then select "Center of Circle" to determine the center point of the arc.
If you need to adjust the size of the arc, you can fine-tune it by selecting the middle point of the arc, and the arc will be automatically drawn on the drawing after confirming that it is correct.
The above is how to draw an arc in CAD brought to you by Xiaobian today, Xiaobian teaches you to easily draw all the content of the arc, if you want to know more wonderful article information, you can continue to pay attention to Xiaobian, Xiaobian will bring you more wonderful articles.