Preface
Recently, Xiaobai found a very strange thing when installing a machine for fans: it is obviously a bluetooth & Wi-Fi module on board, after installing the driver, the Bluetooth on board suddenly becomes a "pop-up device".
This is okay when Bluetooth is not used much in normal times, go directly to the device manager and disable Bluetooth, and the button of "Pop Intel Wireless Bluetooth" will not appear.
If you use Bluetooth a lot, but accidentally click "pop up Bluetooth" when you pop up the USB flash drive, it will be embarrassing for the little friend who uses the Bluetooth keyboard and mouse: the computer can't be operated!
The only way to solve this problem is to shut down the computer and restart it, and Bluetooth can come back. But if you haven't saved the file that you've worked so hard to edit for hours, you'll have to start all over again.
Let's take a look at what ejectable devices generally refer to:
To put it simply, ejectable devices refer to those gadgets plugged into USB on the computer, such as mobile hard disks, U disks, Wi-Fi & Bluetooth modules with USB interfaces, network card converters, USB cameras, etc. Once the device is ejected, it must be replugged or restarted to reload.
Why is the onboard Bluetooth recognized as a pop-up device? This Xiaobai can't say for sure, but Xiaobai tested it and finally found a solution.
The body begins
This post can help you if your computer's onboard (integrated motherboard) hardware module recognizes the onboard device as a pop-up device after the driver is installed. For example: onboard Bluetooth & Wi-Fi module, hard disk, etc.
This article is a solution to the problem that the onboard Bluetooth is recognized as a "pop-up device", and should also be applicable to other solutions where the on-board module is recognized as a "pop-up device".
First, you can try to uninstall the driver module of the device, and then update the driver of the corresponding hardware module. (Not applicable to HDD)
Operation: Click [Right Mouse Button] - [Manage] on [This Computer]
In [Management], find and click [Device Manager] to find the corresponding module.
Click on the > on the left side of Bluetooth.
Then uninstall the drivers belonging to the [Bluetooth] module in the list one by one. Click [Right Mouse Button] - [Uninstall Device] in the corresponding option
If [Delete Local Driver] appears, remember to check it, and then click Uninstall.
After uninstalling them one by one, click [Operation] - [Scan and Detect Hardware Changes]
Update the corresponding [Other Device] or [Unknown Device] driver.
Second, if there is almost no Bluetooth function, you can directly disable Bluetooth.
Find [Bluetooth] in [Device Manager] - click [Right Mouse Button] - [Disable Device] in the corresponding option.
3. If you often use Bluetooth, you don't think about how to recognize it as a pop-up device
Click [View] - [Show Hidden Devices] in [Device Manager], and a [Other Device] - [Intel Tile Device] will appear in the list
In [Intel Tile Device] in [Other Devices], click [Right Mouse Button] - [Disable Device].
--End--
Through the third method, you can recognize Bluetooth as an onboard device, and you can finally not worry about making mistakes.