Hot work is a common type of work in enterprises
The risk is high and accidents are frequent
Practitioners
It is necessary to hold a certificate after passing special training
But there are always some people who are lucky
Carrying out hot work without a license in violation of regulations
Related Cases
On January 13, 2024, a fire broke out in an automobile repair shop in Xiaocheng City, Hubei Province. It was found that Wan, the owner of the car shop, instructed Wang, an unlicensed welder, to carry out electrical welding operations in violation of regulations, and ignited the surrounding combustibles during construction to cause a fire. Wan and Wang's actions are suspected of violating the law. In accordance with the provisions of Article 64, Paragraph 2 of the Fire Protection Law of the People's Republic of China, the Yingcheng Municipal Public Security Bureau gave Wang an administrative punishment of 10 days of detention in accordance with the law.
Related Cases
At 10:50 on November 28, 2023, a fire broke out in the No. 9 vacant plant of Hubei Yongxing Food Co., Ltd. After investigation, the cause of the fire was caused by Cheng Moumou's use of a welding torch to cut in violation of regulations when he was operating in the cold storage area on the second floor of the plant, and accidentally ignited flammable combustibles such as polyurethane foam above the cold storage. The "Special Operation Certificate" held by the oxygen welding engineering has not been reviewed since it expired on October 19, 2018, and has not complied with the fire safety operation procedures and used open flame operations in violation of regulations. The public security organs imposed a five-day administrative detention on him in accordance with the law.
Related Cases
On October 17, 2023, a fire broke out in an idle self-built house in Longquanyi District, Chengdu, Sichuan, and the investigation found that it was an accident caused by illegal electric welding. Guo instructed Yang and Zhang to go to Long's self-built house to carry out illegal electric welding construction, and the welding slag ignited the surrounding foam and other flammable materials during the construction and spread, but fortunately, the fire area was small, no major losses were caused, and there were no casualties. In accordance with relevant laws and regulations, the public security organs of Longquanyi District imposed a penalty of 3 days of administrative detention on Yang and Zhang, and an administrative fine of 300 yuan on Guo.
Welding hot work is a special operation
Relevant workers
Must be trained in special safety technology and pass the assessment
After obtaining the special operation certificate
Licensed work
Article 21 of the Fire Protection Law of the People's Republic of China stipulates that if it is necessary to use open flame for construction and other special circumstances, the approval procedures shall be completed in advance in accordance with the regulations, and corresponding fire safety measures shall be taken;
Personnel who carry out fire hazard operations such as electric welding and gas welding and the operation of automatic fire protection systems must be certified to work and comply with the regulations on fire safety operations.
Article 63 of the Fire Protection Law of the People's Republic of China stipulates that anyone who uses an open flame in violation of regulations or smokes or uses an open flame in a place with a fire or explosion hazard shall be given a warning or a fine of not more than 500 yuan, and if the circumstances are serious, he shall be detained for not more than five days.
Article 64 of the "Fire Protection Law of the People's Republic of China" stipulates that anyone who instigates or compels others to violate fire safety regulations and carry out risky operations shall be detained for not less than 10 days but not more than 15 days and may also be fined not more than 500 yuan;
In addition to the operators holding certificates
Unit (place) construction hot work
It must be carried out in accordance with the fire safety operation procedures
01
Log in to Jingtong "Qi'anan" for online filing, report the location of the hot work, the person who started the fire, the person who watched the fire and other information.
02
Strengthen safety precautions during the fire, welding and thermal cutting operators must be certified to work, construction areas and non-construction areas must be separated by fire prevention, and the hot work site should be guarded by special personnel, clean up combustibles, and equipped with fire-fighting equipment.
03
Implement video surveillance of hot work, and implement video recording of the whole process of hot work by equipping fixed cameras or using mobile phones.