The appearance of limescale is very common, and the main reasons are as follows:
1. High water hardness: tap water in some areas contains more hard substances such as calcium and magnesium, which will form scale on the surface of tiles, metal and glass after long-term use.
2. High humidity in the bathroom: The bathroom is an area with high humidity, and water vapor will condense on the surface of the tiles, and over time, limescale will gradually form.
3. Tile cleaning is not timely: If the bathroom is not cleaned in time, scale will accumulate and be difficult to remove, and thick scale will form over time.
4. Different tile materials: The surface smoothness and anti-fouling performance of tiles of different materials are also different, and some tiles with poor quality or improper surface treatment are more likely to produce scale.
In order to avoid limescale, it is recommended to clean the restroom regularly to minimize the retention time of water vapor in the restroom. At the same time, you can choose better quality tiles, and the surface treatment should be sufficient to improve the ability to resist scale.
Here are three ways to remove common limescale:
1: Kettle limescale citric acid
Use citric acid. Pour the citric acid into the kettle, add an appropriate amount of water and heat until boiling. Then discard the water and rinse it with clean water a few times.
2: Floor tile limescale tincture
Tincture can be used to remove scale, clean the surface of house tiles (such as floor tiles, wall tiles, glass, toilets, bathtubs, basins, toilets, etc.) whitening, whitening, yellowing, rust spots, water spots, scale, rust, tea scale and other stains. The method of use is to evenly sprinkle the tincture on the tile or limescale, dilute it with warm or cold water, and increase the dilution and soaking time if the scaling is serious. It can be soaked for more than four hours, and rinsed with water can remove heavy scale.
3: Toilet urinal, urine alkali scale, picandic acid
Piconic acid is a kind of high-concentration descaling agent, commonly used in stubborn bathroom toilet descaling, can remove a thick layer of limescale urine alkali on the surface of the tile, for the removal of urine alkali scale above 1mm, sprinkle with picandic acid soaking, stubborn heavy scale scale urine alkali will be soaked as soon as it is soaked.