Renovation is a complex process that requires careful planning and management. However, many owners often ignore the details in order to meet the deadline during the renovation process, resulting in unsatisfactory decoration results. In fact, in the decoration process, there are some points in time that can be stopped appropriately in order to better complete the decoration work and achieve better results. Here are five points in time where you can pause for your reference.
First, after the design plan is determined
Before starting the renovation, the owner needs to communicate with the designer to determine the design plan. This stage is the most important part of the whole renovation process, as it determines the tone and style of the whole renovation. Therefore, after determining the design scheme, it is appropriate to stop and carefully consider the feasibility and rationality of the scheme. If there is anything unsatisfactory, it can be modified and adjusted in time to avoid irreversible mistakes in the construction process.
Second, after the completion of hydropower transformation
Hydropower renovation is an important part of the decoration, and it is also one of the most problematic links. After the completion of the hydropower transformation, it can be stopped appropriately to carefully check whether the laying of the circuit and waterway meets the requirements and whether there are potential safety hazards. If there is a problem, it can be found and corrected in time to avoid problems such as water leakage and electricity leakage in the future.
3. Before the masons enter the site
Masonry is one of the important types of work in decoration, mainly responsible for the laying of ground, wall and other areas. Before the masonry enters the site, it can be stopped appropriately to check the design plan and construction drawings again to ensure that the laying area and materials meet the requirements. At the same time, it is also necessary to pay attention to the construction technology of the masonry to avoid problems such as hollowing and cracking.
Fourth, before the carpenter enters the site
Carpentry is another important type of work in decoration, mainly responsible for the production and installation of wood products such as ceilings, doors and windows. Before the carpenter enters the site, it can be appropriately stopped and the design plan and construction drawings can be checked again to ensure that the style, size and materials of the wood products meet the requirements. At the same time, it is also necessary to pay attention to the construction technology of carpentry, so as to avoid problems such as unfirm installation and uneven surface.
5. Before painting construction
Paint construction is the last process in the decoration, and it is also one of the key links that affect the entire decoration effect. Before the painting construction, you can stop appropriately and check the flatness and cleanliness of the wall, top surface and other areas again to ensure that the basic conditions of the paint construction meet the requirements. At the same time, it is also necessary to pay attention to the color, texture and construction method of the paint to avoid problems such as color difference and blistering.
To sum up, don't blindly rush the construction period during the decoration process, and stop appropriately to better complete the decoration work and achieve better results. Stopping at the above five time points can not only check whether the design and construction meet the requirements, but also find and correct problems in time to avoid later rework and unnecessary trouble. Therefore, it is recommended that the owner should arrange the time reasonably during the renovation process, and do not ignore the details and quality in order to meet the construction period.