In home life, there is one thing that every owner must not ignore before renovating, that is, the renovation of water and electricity in the house. You may not expect that this seemingly simple project hides countless knowledge and details behind it. If you are not careful, you may bury hidden dangers and make you regret staying in. Today, let's unveil the mystery of the water and electricity renovation of the house and find out. First of all, you have to know that hydropower transformation is not achieved overnight. In this process, the involvement of the owners is crucial. Let's take a look at some of the points in the process that shouldn't be overlooked. Our first stop is the start of hydropower. This moment is the starting point of the entire hydropower renovation project. All the people – owner, designer, project supervisor, construction supervisor and hydropower construction personnel – each role plays an integral role here. The designer will take out the project, drawings, budget and other materials to explain in detail, while the owner needs to take it seriously and pay full attention. If you have any questions or find that the layout of the water and electricity is not reasonable at this time, then it is the best time to raise and solve the problem. I have to mention here that many owners tend to let their guard down at this stage, thinking that the designer and the construction team will take care of everything.
But remember, any negligence in the details can become a hidden danger in the future. When the disclosure is over, all problems are solved, and you need to sign the written consensus reached on the site, which is a kind of check for the quality of future construction. Next, we ushered in the second stop - the acceptance of hydropower materials. This is a step that should not be underestimated. Imagine those wires and water pipes hidden in the walls and underground, and their quality is directly related to the safety of the home in the future. The owner needs to work with the purchaser and electrician to check the brand, model, specification and quantity. This must be done in place. After checking that there are no problems with the materials, the three parties sign and the process is completed. You may not know it, but the involvement of an electrician is especially important in this process. Because their familiarity with materials is far greater than that of the average owner and designer. This was followed by the laying and acceptance of the hydropower pipeline. This process may sound technical, but in reality, there are a lot of details that need to be paid attention to. For example, whether the fixed buckle of the pipe exceeds the distance of 1 meter, and whether the distance between the wire and the heating, water pipe, and gas pipe meets the specifications, these are all factors that really affect the safety of your residence.
After the laying, the owners asked to keep the wiring diagram and photos, and don't forget that. They can avoid accidentally nailing pipes and wires during construction or painting in the future. Finally, it is the acceptance of the water pipe pressure test. This step is the key to check whether the water pipe is firm and whether there are leaks. The stress test seems to be very professional, but the principle is very simple: it is to see if the tube can withstand a certain amount of water pressure. This process, although invisible, is one of the most sloppy aspects of the entire hydropower transformation. Behind these seemingly ordinary links, it is actually a check on the quality of life in the future. Housing water and electricity renovation is not only a simple construction issue, it is also related to the long-term consideration of safety and life. As a business owner, your responsibility is not just to make payments, but more importantly to participate and supervise. Only in this way can you turn your home into a truly safe and comfortable haven. In the modern residential decoration, the installation of water and electricity in the home is undoubtedly the most critical part of the whole project. A slight negligence can lead to endless trouble and even danger. Therefore, the water and electricity acceptance work after the completion of the home renovation is particularly important. This article will unveil the behind-the-scenes work of water and electricity acceptance for you to ensure the safety of your home.
Hydropower acceptance is not only a technical job, but also a careful job. The inspection of pipelines and the testing of circuits are all delicate processes. Let's start with the pressure measurement of aluminum-plastic pipes and copper pipes. "Pressure measurement for aluminium and copper pipes takes up to four hours, which is a time-consuming and nerve-wracking process. Lao Zhangtou, a master with 30 years of experience as a plumber and electrician, often teaches novices like this. At the renovation site, the pressure measurement of the water pipe is very important, which determines whether the water pipe will become a hidden danger in the home in the future. During the four-hour pressure measurement time, if there is no leakage in the pipeline, the water pressure drops slightly, which is within the normal range. However, if the water pressure drops significantly, then this means a potential risk of water leakage. During the lengthy pressure measurement period, the owners themselves have to devote themselves to this inspection. At least three inspections of all connections of water mains are required. During this process, the owner needs to observe whether the water pipe is shaking abnormally and whether there are signs of water seeping. At the same time, it is necessary to check whether the water flow of the upper and lower water pipes is smooth, whether the water pressure is stable, and whether the drainage speed is good. These are the details, but they are also the key to determining the safety of water in the household. But the acceptance of hydropower does not stop there, and the acceptance of circuit transmission is also a big project, and every step is crucial.
First of all, the circuit transmission acceptance should check whether the voltage load can meet the needs of household electricity. In our daily life, there are more and more high-power electrical appliances, if the design of the power socket is not reasonable or does not meet the safety standards, once the use of high-power appliances, it may lead to circuit overload and danger. Lao Zhangtou will pay special attention to whether the leakage protection device of the meter box is installed in place, because this is related to the electrical safety of the whole family. He also double-checks the water and electricity pipes for crossing. When designing, it is necessary to make sure that the water pipe is under and the electric pipe is on the top to prevent water leakage from affecting the safety of the circuit. In the layout of the wire, Lao Zhangtou will emphasize that the wire must have obvious color separation, which will save a lot of trouble in future maintenance. He will also use a special instrument to test the insulation resistance value of each circuit, which is not less than 0.5 megaohms to be considered qualified. In addition, according to the regulations, the metal parts of the bathroom, faucets, showers, valves, water pipes, natural gas pipelines and grounding need to be connected. This connection is not a simple connection, but to ensure that they are at the same potential, so that the danger of static electricity or leakage can be effectively avoided. Lao Zhangtou will also pay special attention to the intersection of strong and weak electricity.
In these areas, he wraps them in tin foil to prevent signal interference. This small action can avoid many unnecessary distractions when you are using the computer and watching TV. Finally, Lao Zhangtou will also test the weak current system to ensure that each line is unimpeded. He will use the network cable tester to connect each network cable, and judge whether the network cable has an incorrect connection through the display on the screen. For modern families, the network has become a part of life, and the normal operation of the weak current system is equally important. Hydropower acceptance is a link that cannot be ignored in the home installation project, which is related to the long-term safety and comfort of the family. From the pressure measurement of aluminum-plastic tubes and copper pipes to the power transmission acceptance of circuits, each step requires fine operation and strict standards. Ordinary owners may lack understanding of these professional knowledge, but through an experienced master like Lao Zhangtou, we can learn these key acceptance steps and points Xi. In the end, when the water and electricity acceptance is completed one by one and all the indicators meet the standards, the owner of the home can really rest assured. For renovation workers, every detail of this process is a test of their own craftsmanship.
Lao Zhangtou always believes that only by perfecting this last link can we create a safe and comfortable home for the owners. At the end of the home decoration, it is not only a victory of decoration, but also a respect and inheritance of professionalism.