The T12 white light temperature control integrated handle sold by the altar friends who replaced it with points in the Digital Home Forum

The dismantling was carried out in April '23

The big guy in the points mall is exchanged, mainly because of the T12 small knife head soldering iron head

As long as you prepare a power supply of about 12-28V3A and a DC plug, you can drive this convenient soldering iron. The advantage of T12 is that it heats up quickly and is stable and does not drift in temperature. I remember when I first entered the forum, I used one set of Apple power packs and then built two sets one after another.

The transparent handle shell has a clear internal circuit structure.

The soldering iron handle is centralized, and it can be used normally as long as the DC12-30V power supply is provided, which is more convenient to carry

Take it apart and take a look at the workmanship

Disassembling is also very simple, and it is actually a matter of integrating the circuit board into the handle

The workmanship is not bad.,It feels very tall.,At the beginning, it seemed to be known as the local tyrant version.、Beef version of T12 (in the early days of DIY,Someone used a set of 10 yuan cost.。。 ）

Sensor detail (macro shot)

At the same time of dismantling, by the way, the large soldering place of the circuit board is tinned (for more reliable). In fact, it's called itchy hands

Especially at the shrapnel, it must be welded firmly

Take out the copycat 19V notebook power supply, it turned out to be a colleague's garbage notebook, thinking that the power supply was genuine, and it was found that it was a copycat after dismantling it at that time.

The boost was not captured, and it probably reached about 60 watts, and then an early post was made to replace this copycat power supply with a 24V power supply

Cooperate with a set of garbage power supply.

After that, when you go out to work, as long as you have this set of handy soldering irons, it is very convenient and convenient.