The OPPO Reno11 series warm-up campaign has been launched, and more information has been revealed
As a product launched by OPPO for the mid-to-high-end market in the first half of this year, the Reno10 series models have been favored by many consumers with their excellent performance in product appearance and image since their debut. Following previous rumors that the follow-up product of the series, the Reno11 series, is expected to be officially released this month, the official has also launched relevant warm-up activities, and some sources have also revealed the main control configuration of the two new machines in the series.
According to the relevant information on the product side that has been exposed so far, the Reno11 series may provide at least two new machines, Reno11 and Reno11 Pro, the thickness of the two bodies may only be 7.59mm and 8.19mm respectively, and the weight is only 184g and 190g. In terms of appearance, the front of the fuselage of this series may continue to use the current mainstream centered open-hole curved screen, and the upper left corner of the back may be placed with an oval rear multi-camera module, and it is expected to continue to use"Window of vision" design.
In terms of hardware configuration, it is reported that the Reno11 in the series may be equipped with a MediaTek Dimensity 8200 main controller, which is expected to provide a 4800mAh battery and support 67W wired fast charging. In terms of image, it may be equipped with a rear triple camera module composed of LYT600 main camera + IMX355 ultra wide angle + IMX709 ×2 telephoto secondary camera.
The Reno11 Pro, which has a higher market positioning, may use a curved screen with 1.5K resolution, support for a maximum 120Hz refresh rate, and 2160Hz high-frequency PWM dimming, and is expected to be equipped with a Snapdragon 8+ main controller, as well as a storage combination of LPDDR5X+UFS3.1, and may provide a 4700mAh battery and support for 80W wired fast charging. In terms of image, it may be equipped with a rear triple camera module composed of a 50 million pixel IMX890 main camera + IMX355 ultra wide angle + IMX709 ×2 telephoto secondary camera.
If the current information about the two new machines of the Reno11 series is true, it means that in addition to the regular hardware configuration upgrades, it is very likely that it will also bring more highlights such as image and exterior design. However, as for the specific product details of this series of models, it remains to be confirmed by OPPO for further follow-up information, and interested friends may wish to continue to pay attention.
[The picture in this article comes from the Internet]