To set up a public IP remote connection, you can take the following steps:
1. Obtain a public IP address: First, you need to obtain a public IP address from your network service provider. You can obtain your public IP address by visiting an online tool or by contacting an internet service provider.
2. Make sure that the target device has the remote service enabled: Make sure that the target device you want to connect to remotely has the corresponding remote service, such as Remote Desktop Service (Remote Desktop Service) or SSH service, enabled. Please refer to your device's operating manual or official documentation to learn how to enable remote service.
3. Configure the router: If you are using a router, you need to configure port forwarding or virtual server to forward the port of external requests to the internal IP address and port of the target device.
a. Log in to the router management interface, usually by entering the default gateway IP address of the router (for example, 192.168.1.1) in the browser.
b. Find options such as "Port Forwarding", "Virtual Server", "NAT Mapping", etc., the name of the option may vary depending on the router model.
c. Create a new port forwarding rule that specifies the external port and the internal IP address and port number. For example, you can forward a port of a public IP address (for example, 3389) to the internal IP address and port of the target device.
4. Configure a firewall: If you have a firewall on your network, make sure that the firewall allows remote connection requests from public IP addresses to pass through. You may need to open the appropriate port or configure an allow list in your firewall settings.
5. Test the connection: After completing the above steps, you can try to use remote desktop software (such as Remote Desktop that comes with Windows) or other remote connection tools to enter the public IP address and the credentials of the target device to connect remotely. Make sure that the target device is already powered on and connected to the internet.
Please note that in the case of dynamic public IP addresses, the public IP address may change. For easy remote access, you can consider using Dynamic DNS, which associates a fixed domain name with your dynamic public IP address. This way, you can simply use the domain name to make a remote connection instead of having to manually enter the IP address every time.
About (How do I set up a remote connection to a public IP address?) Thank you for taking the time to read the content, if you want to know more, you can consult on (h.shanchendaili.com) Shanchen http!