Today brings the ROG X670E-GENE+4080 Raptor + Mechanical Master C30Pro installation display. The chassis comes from the Meshanic Master C30Pro Small Vision AIR. This is a compact M-ATX chassis, but also the first model of the mechanical master to support the back-in motherboard, black silver yellow and other multi-color optional (this time to show the moonlight silver AIR model), the size is: 320x230x320mm, the volume: about 27.5L, the net weight: about 2.5kg, the shell is made of 2mm aluminum alloy, the inner shell is made of 1mm SPCC steel plate, the inner and outer double shell design, the structure is solid. In terms of compatibility, it supports ITX, M-ATX conventional motherboard and M-ATX rear plug motherboard installation, supports 162mm tower air cooling, top can be installed 360mm water cooling, graphics card length up to 420mm, power supply support ATX, SFX-L, SFX power supply, with a memory cooling fan mounting bracket, can be used for memory limit overclocking assisted cooling use.
This chassis is small, and at 27.5L, it can still fit an M-ATX motherboard, an ATX power supply, and a 4090/4080 Raptor graphics card, and there is plenty of space for cable management on the back. It should be noted that when the top is 360mm water cooling, if the graphics card is ≤ 335mm, the ATX power supply can be installed below, and the length of the power supply does not exceed 140mm; If the graphics card is between 336-420mm in length, it can be installed in the middle of the ATX power supply, and the length is also not more than 140mm to facilitate cable management. C30Pro small body and large capacity, if this chassis wants to install a little limit, more test the wire management skills, the cable as thin and soft as possible, the length is moderate.
In terms of hardware, the latest AM5 platform is adopted, and the ROG CROSSHAIR X670E-GENE with 16+2 power supply module (110A) is selected with the 7950X motherboard; The graphics card uses the ROG STRIX RTX 4080 O16G Gaming Raptor with an 18+3 super-alloy digital power supply scheme, and the distinctive red and blue gradient color scheme is very technological cyberpunk; The memory is equipped with Guangwei Shence DDR5 RGB 6800 Haoyue White 32GB (16Gx2), Hynix A-Die particles, CL34 ultra-low timing, one-key overclocking up to 6800MHz, jelly texture ARGB lighting effect, support Intel XMP 3.0, AMD EXPO dual platform; The solid state is Asgard PCIe AN4+ 2TB, YMTC Xtacking3.0 architecture new generation TLC flash memory particles, continuous read and write 7450/6500 MB/s, official five-year warranty, 1200 TBW endurance, MTBF up to 1.5 million hours;
Power supply from Haiyun FOCUS GX-1000 ATX3.0, 14cm small and easy to install, all-day capacitor, higher than Intel 200% instantaneous peak power consumption, native 12VHPWR interface in line with PCIe 5.0 specification, support up to 600W output; The Cooler Supreme Ice God G360 Phantom was selected for heat dissipation, and the Gen S dual-chamber was newly designed, and the water head used an LCD display for intelligent monitoring systems and customized images using Master Plus software. The wrap-around ARGB design on the top cover of the water block, the radiator fins increase the heat dissipation efficiency, and the dual aperture Halo² fan improves the fan performance and more uniform light efficiency. Well, so much for the introduction, let's enter the installation link.
Hardware configuration checklist:
CPU：AMD Ryzen 9 7950X
MOTHERBOARD: ASUS PLAYER REPUBLIC ROG CROSSHAIR X670E-GENE
Graphics: Asus Gamer Nation, ASUS ROG STRIX RTX 4080 O16G Gaming Raptor
Memory: Gloway DDR5 RGB 6800 Haoyue White 32GB (16Gx2)
SSD: Asgard PCIe AN4+ 2TB x2
POWER SUPPLY: SEA SONIC SEASONIC FOCUS GX-1000 ATX3.0
Cable: Haiyun Seasonic 90 degree L-type 12VHPWR embossed module line
Cooling: CoolerMaster G360 Phantom
Fan: CoolerMaster MF120 HALO² x1
Chassis: Meshanic Master C30Pro AIR Moonshine Silver
First, the whole machine display.
The whole machine is silver-black tone, gold RGB lighting effect (R255, G80, B0).
The following is a display of the various angles of the host.
Chassis motherboard side display.
A single 2mm black anodized aluminum alloy side panel on the back of the chassis with CNC stripe ventilation cutouts on the left side.
The back plate is also tool-free. Remove the backplane and display the cable management on the back of the chassis.
AIR front panel twill cut-out ventilation design, silver aluminum alloy anode panel with a contrast design pre-applied black dust screen.
The chassis I/O is in the lower right corner of the front panel, from top to bottom: 2x USB3.0 TypeA, 1x 10G USB Type-C, 1x 3.5mm composite audio interface, 1x chassis all-metal switch, built-in white LED indicator. Richer interfaces than previous models.
Chassis aluminum alloy shell details display.
The chassis enclosures are all made of 2mm aluminum alloy anode panels.
The delicate aluminum CNC side panel hand-screw screws, concentric circular knife pattern on the front, and the knurled non-slip design on the side are more refined than ever.
Remove the tempered glass side panel on the left side of the chassis to see the hardware inside the chassis.
Cooler Supreme Ice God G360 Phantom Water Cooled Headlight Effect Display.
The 12 independent ARGB LED lamp beads on the top of the water block wrap around the water block for a full, flexible wrap-around experience.
Newly designed Generation S dual-chamber water block for higher flow rates and lower noise.
The head uses an LCD display for intelligent monitoring systems and customized images using Master Plus software.
The top 360mm radiator has been optimized with the addition of heat fins to improve and enhance heat dissipation efficiency.
Dual-aperture Halo² fan for improved fan efficiency and more uniform and refined light efficiency.
The following is a multi-color lighting effect display session.
Thanks to the excellent design of the mechanical master C30Pro, 1 Cooler MF120 HALO² is installed next to the memory, which can cool and heat the SSD and memory at the same time, especially suitable for memory overclockers.
Cool Extreme MF120 HALO² front lighting display.
ROG CROSSHAIR X670E-GENE Power Supply Cooling Module Lighting Effect. The heat sink is diagonally cut hollowed, built-in RGB lamp, and supports divine light synchronization.
The motherboard power supply cooling module adopts a one-piece design, and the top is covered with the ROG CROSSHAIR logo printed on it, dot matrix style.
Guangwei Shence DDR5 RGB 6800 Haoyue White 32GB (16Gx2) lighting effect display.
The top is made of high-transparency acrylic material combined with light guide strip design, supported by Amicic 16.8 million color lamp beads, the new lamp beads not only have higher brightness and wider irradiation range, but also have excellent color reproduction ability, bringing a jelly-like fresh RGB visual experience, creating a perfect sense of e-sports atmosphere.
Hynix A-Die particles, CL34 ultra-low timing, one-click overclocking up to 6800MHz. The surface 2.0mm thick aluminum heat sink contains a brass vapor chamber, and both sides are pre-pasted with high-performance silicone grease heat dissipation pads, with PMIC thermal grease pads for strong heat dissipation.
The M.2 plug-in card expansion card of the motherboard GEN-Z.2 covers a large area of heat sink on the front and back sides, and a heat pipe extends from the top, using a custom interface to connect with the motherboard, without affecting the rate of the PCIe 5.0 x16 slot.
Built-in Asgard PCIe AN4+ 2TB x 2. YMTC Xtacking3.0 architecture new generation TLC flash memory particles, continuous read and write 7450/6500 MB/s, official five-year warranty, 1200 TBW endurance.
ROG STRIX RTX 4080 O16G Gaming Raptor graphics card side lighting display.
THE GEFORCE RTX LOGO ON THE LEFT.
On the right is the REPUBLIC OF GAMERS LOGO lighting effect, and the transparent acrylic on the right is a ring light strip, and it has ARGB lighting effect.
The ring light at the rear is displayed with light effects.
Equipped with Haiyun 90 degree L-type 12VHPWR embossed module line. The wire adopts soft embossed thread, which is as fine as weaving texture, and the installation is more beautiful, and the wire diameter is 16AWG high-specification wire diameter. No bending is required, saving space and safely covering the side panel of the chassis.
The entire card adopts a new thermal module design with a fully enclosed heat dissipation panel, backplane and die-cast metal frame.
ADC 10 high-hardness aluminum alloy material with better mechanical properties is used, which greatly enhances the ability of the graphics card to carry deformation.
The rear twill grille of the graphics card is cut-out, and the tail cutout design runs through ventilation to reduce the weight of the tail and prevent sagging, while taking into account the heat dissipation air duct.
Haiyun FOCUS GX-1000 ATX3.0 Gold Medal Full Module Power Supply. All-day capacitors, 200% instantaneous peak power higher than Intel ATX3.0 standard, native 12VHPWR interface PCIe 5.0 compliant, support up to 600W output.
140mm short body, still maintain a small body under high power, compatible with more small chassis flagship configurations. Comes with 13.5cm FDB fan, larger air volume and better heat dissipation, digital IC monitors real-time temperature and load, automatically adjusts fan speed, more accurately controls fan start and stop, 0dBA mode prolongs fan life.
The left stripe ventilation cut-out on the back of the chassis.
The irregular ventilation hole design of the back left back panel allows the installation of a 240mm radiator or two 120mm fans.
This chassis supports the M-ATX rear plug motherboard, with plenty of space on the back and a well-designed cable management position, as well as two 2.5" hard drive mounting slots on the right.
The upper left part of the rear of the chassis is the power interface, the lower part is the motherboard I/O bezel interface, the right twill cutout is the 120mm fan mounting position, and the mechanical master logo in the center cutout. Below is the graphics card interface.
Second, the accessories are unpacked.
THE MOTHERBOARD IS FROM THE ASUS PLAYER NATION ROG CROSSHAIR X670E-GENE.
First, let's look at the annexes. Includes instruction page, manual, 1 ROG sticker, 1 thank you card and 1 bracelet key ring.
Scattered accessories include: 1 wireless card antenna, 2 SATA6 data cables, 1 ARGB cable, 1 metal simple graphics card support bracket (magnetic design at the bottom), 1 M.2 thermal sticker, and other accessories and on-board interfaces corresponding to cables, temperature measurement cables, M.2 screw packages and mounting buckles.
Comes with a flannel pocket containing 1 ROG True Voltician monitoring module and 1 drive USB stick.
The first is the ROG True Voltician monitoring module. With the reserved interface on the motherboard, the voltage status of 12V/5V/3.3V can be monitored in real time and the relevant data can be recorded and exported, and the mode to be measured and monitored can be selected through the included cable and jumper settings on the module. The unit can be mounted to another computer for monitoring the display by plugging in the unit onboard a front-facing USB 2.0 power station or with a Micro USB cable.
The included GEN-Z.2 M.2 add-in card expansion card covers a large area of heatsink on both sides, extends a heat pipe on the top, and uses a custom interface to connect to the motherboard without affecting the rate of the PCIe 5.0 x16 slot.
The heat pipe is only suitable for the front heatsink, that is, the corresponding side of the PCIe 5.0 interface, and the heatsink is pre-pasted with thermal conductive stickers. Provides a maximum PCIe 5.0 x4 rate and is compatible with 2242/2260/2280/22110 sizes on SSD specifications.
The other heatsink on the back is the same twill cut rib style as the front.
There is no heat pipe addition, and the thermal conductive sticker is pre-applied. The back slot is PCIe 4.0 x4 and SSD size is also compatible with 2242/2260/2280/22110 size.
Remove the motherboard. ROG CROSSHAIR X670E-GENE This is an M-ATX motherboard with a black main color and silver pixel dot matrix style.
The motherboard adopts a 16+2 phase power supply design, a huge L-shaped power supply heat dissipation module to support the low temperature stability of power supply, and an integral heat pipe embedded in the two heat sinks to better balance heat generation.
The CPU-powered cooling module adopts a one-piece design, and the top overlay is printed with the ROG CROSSHAIR logo, dot matrix style.
The heat dissipation module on the I/O side is diagonally cut and hollowed, and the built-in RGB lamp supports divine light synchronization, presenting a mirror effect when no power is applied.
The same rough miter design of the heatsink in the power supply area above the CPU can also effectively increase the heat dissipation area.
AMD AM5 LGA1718 socket supporting the latest Ryzen 7000 series CPUs with blackened fasteners.
On-board 2 dual-channel DDR5 memory slots, supporting up to 128GB DDR5 memory, supporting AMD EXPO and Intel XMP standards, and supporting up to OC 6400Mhz+. The slot on the right side of the memory is the M.2 add-in expansion card interface of GEN-Z.2.
The M.2 add-in expansion card of GEN-Z.2 works when installed to the motherboard.
The CPU is powered by a dual 8Pin design, both with metal shields.
The motherboard storage expansion area covers a large area of chipset cooling module and M.2 heat sink, and the appearance design is also rough bevel grain.
Brushed metal GENE logo on the left.
Disassemble the M.2 heatsink under the PCIE slot of the motherboard, pre-install the bottom heatsink, the initial position is adapted to the 2280 size, for the 2242 and 2260 back heatsink pre-installed thermal pad has reserved a hole line, just remove and screw the corresponding size fixing buckle on the lower heatsink.
Stereo pixels on the surface of the chipset heatsink Rafale ROG loser eye. Four SATA ports are available, with two vertical motherboards on the left and two parallel boards next to a set of front-facing USB 3.2 Gen1 19-pin ports.
The ROG graphics card quick release button is standard, and the upgraded version is smoother and easier to use.
On the back of the motherboard, the AMD AM5 platform backplane adopts a black nickel effect.
In terms of I/O interfaces, from top to bottom, they are: 1x BIOS flash and BIOS clear buttons, 1x PS/2 keyboard and mouse interfaces, 2 USB2.0, 2 USB 4.0 (support DP output), 1 USB 3.2 Gen2 Type-C, 5 USB 3.2 Gen2, 1 2.5Gb LAN, 2x wireless card dual antenna interface, 5 3.5mm + 1 S/PDIF optical output audio interface.
The graphics card is also from Asus Gamer Nation, ASUS ROG STRIX RTX 4080 O16G Gaming Raptor.
Accessories include an instruction manual, an assemblable ASUS thank you card, a guide to using the bracket and power cable, and a ROG product collection card.
Comes with a 16Pin to 3x8Pin adapter, a Velcro with ROG logo, and a graphics card stand.
Let's look at the graphics card itself. The graphics card is rectangular, measuring 357.6 x 149.3 x 70.1mm, and the exterior design incorporates a large number of cyberpunk worldview elements, and the surface is made of dark gray aluminum alloy with a characteristic red and blue gradient color scheme. In terms of specifications, the ROG Strix RTX 4080 O16G Raptor graphics card adopts RTX 4080 cores, has 9728 CUDA cores, supports PCIe4.0, and the video memory is the latest 16GB GDDR6X, and the memory frequency is 22.4Gbps. Benefiting from the solid heat dissipation material of the graphics card, the default frequency of the graphics card reaches 2625Mhz, and the acceleration frequency is 2655MHz, which is much higher than the frequency of the public version (the public version is 2510MHz).
Three large, newly upgraded Axial-tech 7-fan dual-ball axial fans on the front of the graphics card provide 23% more airflow through the graphics card than the previous generation, resulting in lower temperature and noise and higher performance. Supports reverse rotation and 0dB technology to accurately direct airflow, and the fans on both sides rotate in the opposite direction to the central fan to reduce air turbulence inside the cooling module and increase the air volume through the radiator. At the same time, there is an intelligent fan stop mode, when the GPU temperature drops below 50°C, the three fans will stop running, so you can play games that do not require high performance in a quiet environment, or perform light work. When the temperature exceeds 55°C, the fan starts again and refers to a speed curve that balances performance and noise for work or play.
In the upper left corner, there is a totemic ROG faith logo.
The red and blue "Loser's Eye" logo on the right runs through the fan, which is very designed.
The whole card has a thickness of 3.5 slots, the side of the graphics card can see the central hollow design, the internal dense heat dissipation fins, the core adopts the vapor chamber direct contact and heat pipe embedded design, built-in four 8mm and three 6mm heat pipes, the vapor chamber has a milled groove, so that the heat pipe is embedded without being flattened, so that the heat source is more effectively transmitted to the fins. This powerful combination reduces GPU temperature by up to 5°C when subjected to 500W thermal load compared to traditional thermal plate and heat pipe combinations. With more space and fins, the massive cooling system is optimized for the airflow of three axial fans, efficiently conducts heat from the GeForce RTX 4080 GPU, and is efficiently dissipated by three axial fans.
ON THE LEFT SIDE OF THE SIDE IS THE GEFORCE RTX LOGO.
In the center of the side is the new 12VHPWR power supply interface, supporting PCI-E5.0 specification, a single port up to 600W, using 18+3 superalloy digital power supply scheme, the GPU part uses MP2888A controller chip + TDA21570 (70A) MOSFET, and the memory part uses UP9529QQKF+SIC6389 (50A) power supply scheme. Digital power control with high-current power supply module and 15K capacitors delivers powerful performance. The interface features power sensing and high-speed circuitry to continuously monitor the input power of the power supply and use convenient LEDs to indicate voltage regulation and power line connection problems.
The bottom right side of the graphics card is the REPUBLIC OF GAMERS LOGO lettering, and the transparent acrylic on the right is a ring light strip, and it has ARGB lighting effects.
The ring light strip at the tail turns on the divine light synchronization light effect and the light effect is cool.
The ROG Strix RTX 4080 O16G Raptor is equipped with a metal integrated backplane. The whole card adopts a new heat dissipation module design, equipped with a fully enclosed heat dissipation panel, backplane and die-cast metal frame, and uses ADC 10 high-hardness aluminum alloy material with better mechanical properties, which greatly enhances the ability of the graphics card to carry deformation.
The left twill cut texture on the left side of the graphics card backplane, the GEFORCE RTX logo in the upper left corner, and the ROG totem text logo in the center.
The left side of the backplane has convenient dual BIOS switches.
Axial fans can be quickly selected between "High Performance" and "Silent" speed profiles.
The rear twill grille of the graphics card is cut-out, and the tail cutout design runs through ventilation to reduce the weight of the tail and prevent sagging, while taking into account the heat dissipation air duct. It's also engraved with the ROG logo, and each of the constituent stripes is chamfered with a high-gloss finish.
On the other side of the graphics card, the other side of the graphics card is also hollowed, and the ultra-large-scale fin cooling module and alloy frame can be seen. High-quality die-cast metal frame, cover and backplate to tightly protect the PCB and delicately direct the air flow.
The ROG Strix RTX 4080 O16G Raptor is equipped with a high-strength dual-slot stainless steel bezel and provides 3 DP 1.4a and 2 HDMI 2.1 ports, all of which are native interfaces to facilitate multi-screen display solutions and support up to 8K resolution.
The rear grille heat dissipation design of the graphics card, the silver metal nameplate in the lower left corner is printed with the REPUBLIC OF GAMERS LOGO, and there are also two PWM FanConnect II interfaces in the upper right corner, which is convenient to connect fans and improve the overall heat dissipation performance.
Memory from Gloway DDR5 RGB 6800 Haoyue White 32GB (16Gx2).
Comes with a nice set of white mounting gloves.
Remove the outer sleeve, which contains a delicate pure black magnetic sleeve box, turn up and open the lid of the magnetic box, and the first thing that catches your eye is a detail page cardboard, with gold letters on a black background introducing the origin of the name "Shence", while gold lines outline delicate sketches from all angles of the memory.
Open the card card on the detail page, you can see that the memory is fixed in a tailor-made foam to ensure the safety of the transportation process, and the memory gold finger has a milky white sheath to prevent oxidation.
Take out the memory body, the front of the memory adopts a layered design up and down, the bottom is a 2.0mm aluminum alloy heat dissipation armor, and the electrophoretic white process is sprayed, which belongs to a glossy glossy surface, and the center is made of curved CNC to highlight the texture. In the central area is a goose yellow decorative strip, which is the signature color of the Guangwei Shenze memory. As an ARGB strip, the top is made of characteristic high-transparency acrylic material to form a luminous area.
In terms of heat dissipation, the surface 2.0mm thick aluminum heat sink contains a brass vapor chamber, and both sides are pre-pasted with high-performance silicone grease heat dissipation pads, which are close to the heat sink, PCB and particles, and cooperate with PMIC thermal grease pads for strong heat dissipation.
DDR5 specifications are noted on the right.
The left side is marked with the logo of Guangwei.
On the left side of the back of the memory is a nameplate sticker, marking the memory frequency, voltage, timing, capacity and other performance parameters, memory frequency: DDR5 6800MHz, timing is: C34-45-45-108, voltage: 1.4V, single 16GB capacity. Hynix A-Die particles allow low timing overclocking to higher frequencies when motherboard, processor and other hardware are adapted. The memory also has an on-board PMIC-enhanced power management chip for a more stable power load and rejects lock-up voltages. At the same time, the addition of particles to ON-die ECC provides automatic error correction capability, making memory operation more stable and reliable, reducing the burden on the CPU. On the right is the anti-counterfeiting QR code sticker of Guangwei. The lower gold finger is a thickened 10 μm gold finger, which does not have to worry about oxidation and scratching, improving durability and extending service life. The PCB also adopts a 10-layer PCB board, which adopts an advanced stacking design to superimpose the circuit wiring layer by layer, optimize signal transmission, reduce interference, and bring more stable data transmission and processing capabilities.
The top is made of high-transparency acrylic material combined with light guide strip design, supported by Amicic 16.8 million color lamp beads, the new lamp beads not only have higher brightness and wider irradiation range, but also have excellent color reproduction ability, bringing a jelly-like fresh RGB visual experience, creating a perfect sense of e-sports atmosphere.
The SSD is from Asgard PCIe AN4+ 2TB.
Open the package to see the contents of the package, including an instruction manual, a solid-state drive, the hard disk is wrapped in a transparent plastic shell to ensure the safety of the transportation process, and a mini screwdriver and solid-state drive screws are intimately included for easy installation and use. Asgard Asgard PCIe AN4+ 2TB is an official five-year warranty with 1200 TBW durability and 1.5 million MTBF hours.
Remove the solid body. The drive is designed with a black PCB (this SSD has two PCBs on the market, black and white, the same performance, only the color difference), M.2 2280 specification, supporting the latest NVMe 1.4 standard, NVMe PCIe Gen4 SSD, with a nameplate sticker on the top to indicate the specific model. The hard disk is a 2TB version, using a new generation of TLC flash memory particles based on the Xtacking3.0 architecture of Yangtze River Storage Crystal Stack, with a single chip interface speed of 2400MT/s, which is 50% higher than the previous generation, using a four-channel solution to achieve up to 7450MB/s, continuous read and write 7450/6500 MB/s, NVMe 1.4 technical standards, with HMB and SLC Cache technology, providing a stable and reliable high-speed use environment. Fully meet the needs of esports gaming and productivity.
PCB single-sided particle design, detailed parameter information sticker in the center, no chip on the back, which minimizes the overall thickness and can be adapted to notebooks, PS5 and other installation and use environments with limited space. There is also an ASGAT security QR code sticker on the back.
The power supply chose the SEASONIC FOCUS GX-1000 White.
COMES WITH INSTRUCTION MANUAL, WARRANTY CARD, 12VHPVR WIRING GUIDE, STEAM PREPAID CARD, AND STRAP SCREWS.
This black power supply comes with black embossed module cable, which makes it easy to manage the cable. PVC embossing process, fine as woven texture, softer than ordinary module wire, better routing, more beautiful installation, the use of sufficient copper core high-specification materials, 16AWG wire diameter, high current resistant alloy copper terminal, safe and reliable output.
PCIe 5.0 graphics cable is standard.
The power supply body, the newly designed Focus appearance, the overall size is: 140x150x86mm, this power supply can maintain a power supply length of 1000W of only 14cm, which can be used in various small chassis with flagship configurations. On the front of the power supply is a huge fan cut-out with the Haiyun metal nameplate logo in the center. Included 1 x 13.5cm FDB hydraulic dynamic fan, intersecting 12cm fan cools better, the same air volume speed is lower and quieter. The fourth generation of innovative digital IC intelligent temperature control technology, digital IC monitoring real-time temperature and load, automatic adjustment of fan speed, more accurate control of fan start and stop, 0dBA mode to extend fan life.
The nameplate sticker on the back indicates the specific parameters. All-day capacitors, 10-year warranty, 80 Plus Gold certification, over 90% conversion efficiency, high conversion efficiency, lower heat generation, help extend hardware life, Intel ATX3.0 compliant, 76% efficiency at 10W or 2% very low load, and Erp Lot 6 (standby 0.5W) energy-saving design requirements. The 0.5% float voltage output has faster dynamic response, faster transient slew rate, and more stable voltage output, outperforming the Intel ATX3.0 standard. At the same time, this power supply also supports HaiYun SDP intelligent double protection technology to ensure the stability and safety of the system under extreme load.
The side of the power supply is printed with the word "FOCUS", as well as the shape design of the gravure, and the upper left corner is the brand logo of Haiyun.
Same design on the other side.
Module line output interface, CPU/PCI-E common +12V output interface has 5. Native PCIe 5.0 12VHPWR 16Pin interface with 9.2A high current alloy copper terminals that can carry up to 600W output.
The tail of the power supply, the whole body cutout design to improve the heat dissipation capacity, the left side is the power supply port, there is a metal nameplate on it, the middle is the power switch, the right side is the power mode selection, there are two modes of silent and static cooling.