Tatami mats and wardrobes are customized, and there are generally few conflict problems, but if you do not make tatami mats, the bed is next to the wardrobe, and the wardrobe door cannot be opened, so you need to have a solution and give it up.
▲ As shown in the picture do not make tatami, if you put the bed too close to the wardrobe, resulting in the wardrobe door can not be opened, at this time, of course, replacing the sliding door wardrobe can solve this problem, but the sliding door is too wasteful of space, and it is easy to have problems "Wardrobe cabinet door, push and pull and open which is better?" 》
▲ As shown in the figure, the wardrobe and the desk are customized, the bed just conflicts with the wardrobe, the wardrobe is disconnected from the design, and the lower space is used by opening the upper cabinet door to hang clothes, so that the conflict between the bed and the wardrobe door can be solved
▲Put on the ribbed frame, and use the pull-out space under the desk under the wardrobe
▲ You can also use the universal wheel to meet a pull-out storage from under the desk, so that the wasted space under the wardrobe can be used without affecting the finished bed
▲ As shown in the picture does not make tatami, the wardrobe conflicts with the bed, at this time the segmented design is adopted, and the upper cabinet door can be used under the wardrobe, whether it is hanging clothes or storage
▲ As shown in the picture, the same space is too small, do not want to do tatami, put the bed just conflict with the wardrobe, at this time segmented design, usually only need to open the upper cabinet door, use the space below, storage is not reduced at all, and solves the conflict between the finished bed and the wardrobe
▲ If you do not make tatami mats, it will conflict with the bottom of the wardrobe, disconnect the design, use the space below from above, store sundries, and hang clothes directly to meet the use of space
▲ As shown in the picture, the space size is very tight, first look at the bed in the early stage, and then customize the wardrobe according to the remaining space, disconnect the design, and meet the normal use of the wardrobe
▲ Must look at the bed first according to the space, and then look at the remaining space according to the size of the bed, and customize the wardrobe, so as to ensure that the later size will not be wrong
▲ So if you don't want to make tatami mats, you can completely meet the placement of the bed, but you can plan the size in advance, and use the disconnected design of the wardrobe to meet the storage and avoid conflicts