Recently, Nanchang, Jiangxi
A fire broke out in the workshop of a factory building
Fire and rescue personnel rushed to the scene immediately after receiving the police
Firefighters arrived at the scene and found
An industrial propane gas tank in the plant
It is on fire
An open flame is constantly pouring out of the can
And there is a large truck parked around the tank
There is a risk of tank explosion and fire spreading at any time
Firefighters first moved the truck to a safe area
Then use a water gun to cool and press the tank
After a tense save
The fire at the scene was quickly extinguished
No casualties or other losses were caused
Cause of the accident
In the subsequent site survey
Fire investigators found
The perpetrator of this fire
It turned out to be Zhou Mou, the truck driver on the side
Zhou drove the vehicle to the plant to load the goods
Due to a malfunction of the side door of the truck
Without permission
Use oxygen to weld the iron hook on the door yourself
Make a cut
On the job
High temperature welding slag produced
Dropped on a propane gas tank gas hose
Causes a gas tank to leak and cause a fire
Penalty decisions
After investigation, Zhou did not hold a welding license
The public security organ dealt with Zhou in accordance with the law
Suspected of using open flame operations in violation of regulations
The penalty of 3 days of administrative detention is imposed
Ah Qiu Kop
The use of electric welding or gas welding can be high-temperature welding or fusing of metal, but the molten bead temperature produced by electric welding operation is extremely high, if the preventive measures are not in place, it is easy to ignite the surrounding combustible materials and cause safety accidents, light property damage, heavy lead to casualties!
Therefore, the welding gas cutting operation must be licensed, do a good job of personal protection, and operate in strict accordance with the regulations to prevent problems from "burning".
Article 21 of Chapter II of the Fire Protection Law of the People's Republic of China stipulates that personnel who carry out fire hazard operations such as electric welding and gas welding and the operation of automatic fire protection systems must hold certificates and abide by the provisions of fire safety operations.
The following welding gas cutting "ten is not allowed"
Please keep it in mind!