Although the bottom box is small, the hidden knowledge inside can be greater. No matter how expensive and good the switch socket is, it must rely on the logistics housekeeper of the bottom box.
However, once you encounter inferior bottom boxes, it is troublesome, and it is most likely to age, become brittle and break during use, resulting in the switch socket falling off, bringing potential safety hazards.
Reinstalling a new bottom box, including the cost of electrician's rework, painter's rework, cement sand and bottom box, is equivalent to reinstalling half a home, which is costly, laborious and laborious.
So, what kind of bottom box is a good bottom box, and how should we choose it correctly? Today Xiaoxi will share 4 tips with you to make your installation worry-free and worry-free use.
Tip 1: Prefer virgin materials
Good bottom boxes are usually made of virgin material. The raw material is gradually processed from raw materials, with soft and elastic feeling, strong tensile strength and anti-aging ability, and high gloss, no peculiar smell, environmental protection and health.
In order to save costs, bad merchants often add recycled materials to the bottom box. The recycled material is processed from the raw material into a finished product and then processed twice, which not only has many impurities, peculiar smell, but also has poor bearing capacity, and it is brittle and brittle, and the service life is far inferior to the original material.
Tip 2: Look at the workmanship from the details
In order to save costs, bad merchants are accustomed to using cheap thin shrapnel as the mounting hole for the bottom box, and if you don't pay attention to it, it will fall off and break, and it is quite troublesome to use repair tools.
A good bottom box is usually equipped with a floating nut, when the nut and the screw corresponding to the switch socket are not on the same horizontal line, the nut can be adjusted up and down, installed in one step, spare screw hole blessing, more firmly installed. Even if the screw is artificially damaged, it can be reinstalled again with a spare screw hole.
Tip 3: Choose a pot-bellied bottom box
In the face of the iterative upgrade of the Internet, the whole house smart home layout, choosing a potbelly bottom box will be the wisest decision, large space and large capacity, to meet the needs of various intelligent switch socket installation, future network wiring and so on.
Tip 4: Look for the buckle design
The snap design on the bottom box can avoid problems such as product skew, large gap in the middle, uneven wall during the installation process, unify the distance and height between the bottom box, easy and fast installation, and smooth and beautiful switch socket.
Nishino Tips: From the bottom box of the socket to the renovation of water and electricity, every process should not be taken lightly, and it will be more worry-free after living.
The above is a summary of Xiaoxi's four major methods for the purchase of the bottom box, friends have supplements, welcome to leave a message in the comment area.
If the content is helpful to you, you are also welcome to forward and share it with friends in need, so that more people can master the decoration knowledge!