8 hidden functions of iVMS-4200 client software, come and take notes~
01
A must-have for low-performance PCs
Enable hard decoding/forced substream preview
ask
When I preview more screens in the client, the computer is always stuck, what should I do?
answer
Method 1: Enter System Configuration - Image - Hard Decoding, select D3D9 or D3D11, and save.
answer
Method 2: On the main preview interface, select the corresponding monitoring point folder, click "More", select "Code Stream" - "All Child Stream ", and use the child stream preview~
all
Substream
02
Where can I find manual recording?
Manual recording path finding
ask
I just clicked Manual Video in the client, which disk is the recorded recording stored on the computer?
answer
Enter the system configuration-file interface to view and modify it directly~
Video
Storage path
03
Calibration tools
One-click batch calibration
ask
I have dozens of devices on site, and it is really tiring to configure the calibration server one by one.
answer
Give me 3 seconds to get it, tool in the upper right corner - batch calibration, check the equipment that needs to be calibrated, and click the calibration time to calibrate the device in batches.
batch
School hours
04
Open the preview screen before the software is displayed
Automatically reverts to the preview state before the last shutdown
ask
I want my previous preview to be automatically displayed every time I open the software, is it okay?
answer
Of course, system configuration - preview and playback - turn on "Automatically restore to preview state before last shutdown" after startup, after startup, each open will automatically revert to the preview state before the last shutdown.
05
Green checkered?
Turn on "Show Highlights"
ask
When I see that my friend's client screen has moving objects, there will be a green grid cover, how to configure it?
answer
After configuring the motion detection function of the device, you also need to go to the 4200 client system configuration - image interface, and turn on "display highlighting"~
answer
If you configure rules such as "Area Intrusion" and "Face Capture", you need to display the rule box, and you need to turn on "Intelligent Rule Display" on the System Configuration - Image interface~
06
Client pop-up/audible alarm
Enable the bulletin machine alarm sound setting path
ask
The device has configured event alarms and uploaded to the center, why does the iVMS-4200 client not respond at all?
answer
In iVMS-4200, the "Enable alarm auto-pop-up" and "Turn on sound" of the Event Center interface also need to be turned on~
event
centre
○
This interface can also customize the alarm sound of each category~
07
Where to find the operation log
The client can also find the log information
ask
Will there be an operation log on the client side like the VCR camera?
answer
Of course, enter maintenance and management - system log - select the corresponding time and user to search for it~
08
One-click synchronization of channel names
Secondary operations are rejected
ask
The channel name of my recorder has been modified, and the client side has not found the synchronization, do I need to modify it again?
answer
If you don't need it, enter Device Management-Grouping, click on the Group-Coding channel, right-click, and select the new monitoring point name to achieve synchronization.
synchronous
The name of the monitoring point
answer
If a new camera is added to the recorder, the recorder can already preview normally, but there is no channel on the client, then it is also in this interface to manually import the channel.