1. On the official website "https://www.laomaotao.net/", download the "full version" of the old Mao Tao WinPE production tool
2. Select the downloaded WinPE Maker, right-click and select Extract to...
3. Enter the folder after decompression, double-click the "LaoMaoTao.exe" executable program to enter the interface of the production software
4. After entering the production software, the software will automatically identify the U disk inserted into the computer (the U disk is preferably greater than 8GB), back up the data in the U disk in advance, format the U disk during the production process, so back up the data in the U disk in advance, and then click "Personality Settings", this step is to use the made WinPE system disk to install the system, not to install other third-party software
5. After entering "Personality Settings", click "Support Us" to enter the setting interface to cancel the installation of third-party software
6. Uncheck the "tick" in the checkbox in front of several software, and then click "I want to cancel ruthlessly"
7. Next, there is a "QR code" in the interface that pops up, use the mobile phone "WeChat scan", scan the QR code, and then the mobile phone will automatically jump to the official account of "LMT installation"
8. The official account interface of "LMT installation"
9. In the chat input box of the official account interface, enter the "machine code" in the picture in step 7 and send it
10. After the operation of the previous step is completed, the official account will reply with an "unlock code"
11. Enter the unlock code obtained in the previous step into the input box of "Step 7", and click "OK", if the confirmation command pops up, just click Confirm directly, if it does not pop up, forget it
12. Click "Save Settings", the previous steps will be saved, and when the original system is installed through the PE system disk in the future, the third-party software will not be automatically installed
13. Click "OK" directly
14. Click "Yes" directly
15. Click "One-click to make USB boot disk" here, and then officially start the production of PE system disk
16. This step is to prompt you to back up the original data in the U disk, because the U disk will be formatted during the production process, and click "OK" directly
17. The PE system disk is being made, just wait patiently for the production to be completed
18. The above is the production process of the old Mao Tao WinPE system disk, and the production process of other brands of PE system disk is basically similar, there is no big difference
After the WinPE system disk is made, you can use the system disk to install the original Windows system!
6. Windows PE boot disk (system disk) production